Host Bus Adapter (HBA) Driver Supplement - mpt2 Driver version 2014.06.18,
IHVVERSION 2014.06.18?

KEYWORDS: uw uw7 714 714+ 600 openserver osr6 unix unixware storage driver pci hba LSI mpt2 DDI8 sata sas serial attached SCSI

RELEASE:  SCO UnixWare Release 7.1.4+
          SCO OpenServer Release 6.0.0
          SCO UnixWare Release 7.1.4

PROBLEM:  LSI Fusion-MPT 2 Serial Attached SCSI Host Adapters are not
          supported on either UnixWare 7 and SCO OpenServer 6.
          
SOLUTION: The mpt2 Driver Supplement provides the following driver:

          mpt2 - LSI Fusion-MPT 2 Serial Attached SCSI Driver Version 2014.06.18

          This driver provides support for LSI Fustion-MPT 2 SAS chips and
          host adapters.

          This driver can be used during fresh installation of any supported
          OpenServer 6/UnixWare 7 system or can be applied to an existing 
          system.

          The mpt2 driver is provided in hba.mpt2.2014.06.18.iso, an ISO 
          image of an HBA CDROM.

          This ISO image is available at the following URL:

               ftp://ftp.sco.com/pub/unixware7/714/drivers
               ftp://ftp.sco.com/pub/openserver6/600/drivers

HARDWARE: HBA hardware supported by mpt2 2014.06.18:

          Adapter or Chip Set  Type 
          -------------------  ------------
          LSI SAS2004
          LSI SAS 9211-4i      PCI Express 2.0 4-port internal

          LSI SAS2008
          LSI SAS 9200-8e      PCI Express 2.0 8-port external
          LSI SAS 9202-16e     PCI Express 2.0 16-port external
          LSI SAS 9210-8i      PCI Express 2.0 8-port internal
          LSI SAS 9211-8i      PCI Express 2.0 8-port internal
          LSI SAS 9212-4i4e    PCI Express 2.0 4-port internal +
                                   4-port external
          Dell PERC H200 Integrated/Adapter
                               PCI Express 2.0 8-port internal
          Dell PERC H200 Modular
                               PCI Express 2.0 4-port internal
          Dell 6Gbps SAS       PCI Express 2.0 8-port external

          LSI SAS2116
          LSI SAS 9201-16e     PCI Express 2.0 16-port external
          LSI SAS 9201-16i     PCI Express 2.0 16-port internal

          Dell 6GB SAS controller

          LSI SAS2308
          LSI SAS 9206-16e     PCI Express 3.0 16-port external
          LSI SAS 9207-4i4e    PCI Express 3.0 4-port internal +
                                   4-port external
          LSI SAS 9207-8i      PCI Express 3.0 8-port internal
          LSI SAS 9207-8e      PCI Express 3.0 8-port external
          LSI SAS 9217-4i4e    PCI Express 3.0 4-port internal +
                                   4-port external
          LSI SAS 9217-8i      PCI Express 3.0 8-port internal


-------------------------------------------------------------------------
I. Installation

Prior to installation, burn a CD from the mpt2 Driver Supplement ISO
image.

While installing OpenServer 6/UnixWare 7, insert the mpt2 Driver
Supplement CD before any HBA drivers supplied with your media kit.

Alternatively, install the mpt2 Driver Supplement CD after installation
by inserting the mpt2 Driver supplement CD in the CD drive and issuing
the following command as root:

        pkgadd -d <device>

where <device> is the name of the CD drive, e.g., "cdrom1".  See
pkgadd(1) for details.

For diskless installation, download the ISO image to your system and
use marry, mount and pkgadd to install the driver:

   marry -a /tmp/hba.mpt2.2014.06.18.iso
   mount /dev/marry/tmp/hba.mpt2.2014.06.18.iso /mnt
   pkgadd -d /mnt mpt2
   umount /mnt
   marry -d /tmp/hba.mpt2.2014.06.18.iso

------------------------------------------------------------------------
II. Software Notes

This driver has been tested with and is supported on:

SCO UnixWare 7 Release 7.1.4+
SCO UnixWare 7 Release 7.1.4
SCO OpenServer Release 6.0.0