What is the OpenServer OpenSSH supplement?

KEYWORDS: sls oss 506 5.0.6 openssh openssh-6.0.0Ga 4.2p1 web server open source upgrade update openserver osr5 patch supplement 

RELEASE: SCO OpenServer Release 5.0.6

PROBLEM: Where can I get the latest version of OpenSSH for OpenServer 5.0.6? 

SOLUTION: Download and install the latest OpenSSH Supplement from:

             ftp://ftp.sco.com/pub/openserver5/opensrc/openssh-4.2p1

          This supplement can be installed on the following SCO
          OpenServer release(s):

             SCO OpenServer Release 5.0.6 with RS506A and OSS646C

  NOTE: Before installing this supplement, you MUST first install the following 
        software: 

        Supplemental Graphics, Web, and X11 Libraries, version 2.1.0Ba 
        See ftp://ftp.sco.com/pub/openserver5/opensrc/gwxlibs-2.1.0Ba

  NOTE: The same version of this software is included in SCO OpenServer
        Release 5.0.7 Maintenance Pack 4. You should install Maintenance
        Pack 4 if you want to run this version on SCO OpenServer Release
        5.0.7. This stand-alone package will not install on that platform.

           ----------------------------------------------------------

           I. Software Notes and Recommendations

	   1. The Secure Shell Supplement version 6.0.0Ga provides an 
	      update of OpenSSH to version 4.2p1.

   	   2. Note that you do not need to remove previous versions of this 
	      supplement.  This package will automatically replace any older 
              versions.

           3. If you have any questions concerning this supplement,
              please contact your SCO software supplier or your SCO
              Support Representative.

           ----------------------------------------------------------

           II. Installation Instructions

	   Before you install, you must have Support Level Supplement (SLS) 
           OSS646C, the Execution Environment Update, and gwxlibs 2.1.0Ba 
	   installed.

	   To install this supplement follow these steps:

 	   1. Download the media image tar archive from:

              ftp://ftp.sco.com/pub/openserver5/opensrc/openssh-4.2p1

   	   2. Place the files in a temporary directory such as /tmp/openssh
              and run the command:

       		   tar xvf openssh42p1_vol.tar 

 	   3. Run the Software Manager with the command:

        	    # scoadmin software

    	      or double-click on the Software Manager icon in the desktop.

 	   4. Pull down the "Software" menu and select "Install New".

 	   5. When prompted for the host from which to install, choose 
              the local machine and then "Continue".

 	   6. In the "Select Media" menu, pull down the "Media Device" menu.  
	      Select "Media Images", then choose "Continue".

 	   7. When prompted for the "Image Directory", enter "/tmp/openssh" 
	      (or the directory where you placed the VOL files in step 2) 
	      and choose "OK".

 	   8. When prompted to select the software to install, make sure that 
	      the "Secure Shell" entry is highlighted.  Choose 
	      "Install".

 	   9. Installation is now complete.  To exit the Software Manager, 
              select "Exit" from the "Host" menu.

           ----------------------------------------------------------

           III. Removal Instructions

           Note: Patches must be rolled back in the reverse order in which they
           were installed on a per-component basis.

                1. Log in as root.

                2. Execute the command:

                       # scoadmin software

                   or double-click on the Software Manager icon in the
                   desktop.

                3. Highlight "Secure Shell".

                4. Pull down the "Software" menu and select "Remove Software".

                5. Once the removal finishes, quit the Software Manager.
                   Removal is now complete.