What is SOS4101a, the SCOoffice Server 4.1 install fix for 5.0.6->5.0.7 upgraded
systems

KEYWORDS: sos4101a sco office server oms 4.1 install fix upgrade from 5.0.6 
5.0.7 erg712718 fz530236

RELEASE:  SCO Office Server 4.1

PROBLEM:  I have upgraded from OpenServer 5.0.6 to OpenServer 5.0.7 and 
          installed SCOoffice Server 4.1 but the installation reports errors
          and now the SCOoffice Server will not deliver email and does 
          not function correctly.        

CAUSE:    Permissions differences on a system that has been upgraded from 
          OpenServer 5.0.6 to 5.0.7 cause failures when attempting to 
          run the SCOoffice Server 4.1.
          
SOLUTION: Apply SOS4101a, the SCOoffice Server 4.1 install fix for 5.0.6->5.0.7
          upgraded systems to your server. 

Dear SCO Customer,

Support Level Supplement (SLS) SOS4101a, the SCOoffice Server 4.1 install fix 
for 5.0.6->5.0.7 upgraded systems, addresses the following problem:

          - corrects permissions and ownership of SCOoffice Server files
          and directories

          - stops and disables the OpenServer fasttrack and mana servers. 

          - re-runs the SCOoffice Server setup script so that the  
          configuration can run successfully now that all files and directories
          have the correct perms. 

          - provides updated versions of the SCOoffice Server rc scripts to 
          allow for easier starting and stopping of SCOoffice Server
          processes.

Software Notes and Recommendations
----------------------------------
SLS SOS4101A can be installed on:

      SCO OpenServer Release 5.0.7 systems with SCOoffice Server 4.1 
      installed.

Installation Instructions
-------------------------

1. Download the SOS4101A media image file from:

             ftp://ftp.sco.com/pub/office/410/patches/sos4101a/VOL.000.000

   and put it /tmp.
   
2. Run the Software Manager with the command:

             # scoadmin software

   or double-click on the Software Manager icon in the desktop.

3. Pull down the "Software" menu and select "Install New".

4. When prompted for the host from which to install, choose the local machine
   and then "Continue".

5. In the "Select Media" menu, pull down the "Media Device" menu.  Select
   "Media Images", then choose "Continue".

6. When prompted for the "Image Directory", enter "/tmp" (or the directory
   where you placed the VOL file in step 1) and choose "OK".

7. When prompted to select software to install, make sure that the "SOS4101A"
   entry is highlighted.  Choose "Install".

8. Installation of SLS SOS4101A is now complete.  To exit the Software Manager,
   select "Exit" from the "Host" menu.

9. SCOoffice Server Release 4.1.0 is now ready for use.
 
Removal Instructions
--------------------

Note: Patches must be rolled back in the reverse order in which they were
      installed on a per-component basis.

To remove SLS SOS4101A from SCO OpenServer 5.0.7, follow these steps:

1. Log in as root.

2. Execute the command:

             # scoadmin software

   or double-click on the Software Manager icon in the desktop.

3. Highlight "SOS4101A - SCO Office 4.1 install fix for 5.0.6->5.0.7 upgraded 
system (ver 1.0.0)".

4. Pull down the "Software" menu and select "Remove Software".

5. Once the removal finishes, quit the Software Manager.  Removal of
   SLS SOS4101A is now complete.


If you have questions regarding this SLS, or the product on which it is
installed, please contact your software supplier.