All Prolinea Net/1 Series Downloads for all operating systems

Any operating system not shown is not supported and has no support. The Prolinea Net/1 Series originally shipped with Windows 3.1 and/or Windows 95 support. Any operating system released after the original release of this series should have the drivers included in the operating system for selection and loading. Download or open the manual at the link shown in the Manual post and see if you can determine the hardware that is installed. Then go under that manufacturers name and select the corresponding driver for that hardware. If there is no driver included for that operating system under the manufacturers name then visit that OEM manufacturers Internet site and look for updated drivers.

Go to the link shown above to view or download all of the drivers for all of the operating systems. These operating systems are shown next along with the ROMPaq and System Software. The ROMPaq and System Software cover all ROM upgrades and the F10 setup and diagnostic software. The ROM upgrades are universal, meaning that there is only one ROM for all operating systems. If there is no ROM shown for some older models it means that that model had a burned in ROM chip that was NOT flashable. There will be no ROM upgrades for those models.

Operating Systems

Microsoft Windows 2000

Microsoft Windows 98

Microsoft Windows 95

Microsoft Windows 3.1

Microsoft Windows NT 4.0

Microsoft Windows NT 3.51

Microsoft MS-DOS

IBM OS/2

ROMPaqs and System Software