Deskpro PCI Desktop
Memory Matrix |
||||||||
|
Type |
Connector |
|
|
Standard |
Max |
|
|
Models |
RAM |
Edge |
Pins |
Speed |
Parity |
MBs |
MBs |
Upgrading |
5166 Series |
||||||||
All |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
5150 Series |
||||||||
All |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
5133 Series |
||||||||
1200, 1200/LS, 2000,
2000/ML/CDS |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
1, 1080/W, 1080MX+ |
FPM |
Tin |
72 |
70ns |
No |
16 |
192 |
|
5120 Series |
||||||||
1200 |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
1, 1080/W, 1080MX+ |
FPM |
Tin |
72 |
70ns |
No |
16 |
192 |
|
5100 Series |
||||||||
1200 |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
840 |
EDO |
Tin |
72 |
70ns |
No |
8 |
192 |
|
1080 |
FPM |
Tin |
72 |
70ns |
No |
16 |
192 |
|
630 |
FPM |
Tin |
72 |
70ns |
No |
8 |
192 |
|
590 Series |
||||||||
720/w, 720/MX+, 1080/w,
1080/MX+, 1080/CDS |
FPM |
Tin |
72 |
70ns |
No |
16 |
192 |
|
1, 420/w, 420/CDS, 420/TR,
630/w, 630/TR |
FPM |
Tin |
72 |
70ns |
No |
8 |
192 |
|
575 Series |
||||||||
840 |
EDO |
Tin |
72 |
70ns |
No |
16 |
192 |
|
1, 420/w, 420/CDS, 420/TR,
630, 630/w, 630/TR |
FPM |
Tin |
72 |
70ns |
No |
8 |
192 |
|
Type |
Connector |
|
|
Standard |
Max |
|
|
Models |
RAM |
Edge |
Pins |
Speed |
Parity |
MBs |
MBs |
Upgrading |
4100 Series |
||||||||
All |
FPM |
Tin |
72 |
70ns |
No |
8 |
136 |
|
466 Series |
||||||||
All |
FPM |
Tin |
72 |
70ns |
No |
8 |
136 |
|
450 Series |
||||||||
All |
FPM |
Tin |
72 |
70ns |
No |
8 |
136 |
|
Standard Memory |
Slots |
|||
Standard/Max |
Soldered |
Socketed |
Used |
Empty |
Total |
16MBs/192* |
None |
Two 8MB SIMMs |
2 |
4 |
6 |
8MBs/192* |
None |
Two 4MB SIMMs |
2 |
4 |
6 |
16MBs/192 |
None |
Two 8MB SIMMs |
2 |
4 |
6 |
8MBs/192 |
None |
Two 4MB SIMMs |
2 |
4 |
6 |
8MBs/136 |
8MBs Soldered |
None |
0 |
4 |
4 |
NOTE:
* Models listed below have EDO SIMMs instead of FPM installed in slots.
Series |
Models |
5166 |
All |
5150 |
All |
5133 |
1200,1200/LS, 2000, 2000/ML/CDS |
5120 |
1200 |
5100 |
840, 1200 |
Note: Using EDO or FPM SIMMs:
EDO (Extended Data Out) or FPM
(Fast Page Mode) SIMMs can be used.
Upgrade in Pairs.
If EDO and FPM SIMMs are mixed ( EX: using two EDO SIMMs and two FMP SIMMs) ,
the computer will default to FPM and system performance may be lost.
Advantage of using EDO:
EDO DRAMS offer performance benefits over and above what is commonly
available with standard Fast Page Mode (FPM) DRAMs. With EDO DRAM, when CAS is
deasserted, the data remains valid, so it can accomplish read access times of
approx -2-2-2 clocks.
In short, EDO squeezes more transfers into a given amount of time, thereby
increasing performance.