SOFTPAQ NUMBER: SP9909 PART NUMBER: 386298-006, 386299-006 FILE NAME: N/A TITLE: Workstation Millennium II/G200/G100 MMS Drivers for Windows NT 4.0 VERSION: 4.06 Rev A VENDOR VERSION NUMBER: 4.06.023 LANGUAGE: English, French, Italian, German CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation 5100, 6000, 8000, AP200, AP400, AP500, or SP700 using the Millennium II Graphics Controller; Compaq Professional Workstation AP200, AP400, AP500, or SP700 using the G200 PCI or G200 AGP Graphics Controller; Compaq Professional Workstation AP400, AP500, or SP700 using the Productiva G100 MMS Graphics Controller NOTE: These graphics controllers are standard equipment on selected Workstation models only, but could be an option installed on other models. OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: Millennium II Graphics Controller (PCI), Millennium G200 Graphics Controller (PCI or AGP), or Productiva G100 MMS Graphics Controllers EFFECTIVE DATE: March 17, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP9627 DESCRIPTION: Creates the two-diskette set, "Workstation Millennium II/G200/G100 MMS Drivers for Windows NT 4.0." Enhancements/Fixes: Display driver: - The line drawing code has been modified for better performance (errorinit bit support) with G200 boards. - The memory sizes for DirectDraw are reported in bytes instead of pixels. - Right clipping has been added in the multi-board text code for flat panel. - A fix for the PixelVision code has been made. - The overlay is now supported for flat panel. - The clipper limit for AutoCAD has been removed in bCreateSurfaceRGB. - The 2D bus mastering code has been reorganized. - Bus mastering transfers now use RPL whenever possible. Miniport driver: - The miniport driver is now VGA-compatible. - BIOS tables have been added for FlatPanel. - For Productiva G100 MMS, the minimum amount of memory is read from the PINS. - The PINS checksum for Quad G100 slave chips is modified to take into account the modification to the serial number, and bValidateBiosPin verifies the checksum. HOW TO USE: 1. Obtain 2 formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. To Install, see A:\READMENT.TXT on the first diskette. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies