SOFTPAQ NUMBER: SP9711 PART NUMBER: 386577-294, 386578-294 FILE NAME: N/A TITLE: Server Diagnostics (Japanese) VERSION: 10.23J Rev A LANGUAGE: Japanese CATEGORY: Diagnostics-Setup DIVISIONS: Systems PRODUCTS AFFECTED: Compaq ProLiant, ProSignia and SystemPro Servers; OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 22, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP9510 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. It creates two separate diskettes for the TEST utility and INSPECT utility (different from U.S. version of Server Diagnostics, which creates only one diskette). Server Diagnostics support currently shipping Systems Division server products. It is installed on the Diagnostics Partition for those systems which support it and have hard drives. It is shipped as a diskette on all other products. Enhancements/Fixes: - Support for Pentium III Xeon 500 MHz processor upgrades to ProLiant 6000, 6500, and 7000. - Added support for ProLiant 6400R. - Added support for upgrade to SMART 3100ES controller. - Fixed problem causing lockups during processor ID on ProLiant 5500 and 6500 servers with three processors installed. HOW TO USE 1. Obtain two (2) formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. For installation instructions, run README on the 1st created diskette. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.