SOFTPAQ NUMBER: SP9679 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Workstation Support Software for Microsoft Windows NT 4.0 (All component drivers) VERSION: 2.04 Rev a LANGUAGE: English CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: All Compaq Professional Workstations OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 24 MARCH 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP9460 DESCRIPTION: This SoftPaq creates two files -- a description file and a large self-extracting executable file. The self-extracting executable file contains Compaq Workstation Support Software for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Professional Workstations: Array Controllers Compaq SMART-2DH Array Controller Compaq SMART-2/P and Compaq SMART-2/E Compaq SMART-2SL Array Controller Compaq Smart Array 221 Controller SCSI Controllers Adaptec AIC-78xx PCI SCSI Controller ATAPI/IDE Controller Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller (formerly named the 32-Bit Wide-Ultra SCSI-2/P) Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Network Interface Controllers Compaq NC3161 Fast Ethernet NIC Compaq NC3131 Fast Ethernet NIC Compaq NC3121 Fast Ethernet NIC Compaq NC3120 Fast Ethernet NIC Compaq NC1120 Fast Ethernet NIC Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller Compaq Netelligent 10/100 TX Embedded UTP Controller Compaq NetFlex-3 Embedded Controller Network Module Upgrade Option 100 VG Module 10/100 TX Module 100 Base-FX Module Compaq NC3132 Fast Ethernet Module Compaq NC3133 Fast Ethernet Module Compaq NC6132 Gigabit Module Compaq NC6133 Gigabit Module Audio ESS 1868/1869 AudioDrive Controller Video Compaq PowerStorm 300 Graphics Controller Compaq PowerStorm 600 Graphics Controller Diamond Multimedia Fire GL 4000 Graphics Controller ELSA GLoria-L Graphics Controller ELSA GLoria-XL Graphics Controller ELSA GLoria Synergy Graphics Controller ELSA GLoria Synergy+ Graphics Controller Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP/Productiva G100 MMS Graphics Controllers Matrox MGA Millennium Graphics Controller STB MVP Pro-128 Graphics Controller STB MVP Workstation Graphics Controller Utilities Compaq Advanced Network Control Utility Compaq Array Configuration Utility Other Compaq ProLiant Storage Systems System Health Logs (on the Compaq Professional Workstation 5000, 5100, 6000, 8000, and AP400) Compaq CD-ROM Drives Logitech Mouse Enhancements/Fixes: Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.04 Rev. A The release of the Compaq Workstation Support Software for Microsoft Windows NT 4.0, Version 2.04 Revision A, primarily supports the following new products: ˇ Compaq PowerStorm 600 Graphics Controller ˇ Compaq Smart Array 221 Controller ˇ Compaq NC3131 Fast Ethernet NIC ˇ Compaq NC3132 Fast Ethernet Module ˇ Compaq NC3133 Fast Ethernet Module ˇ Compaq NC6132 Gigabit Module ˇ Compaq NC6133 Gigabit Module Compaq PowerStorm 600 Graphics Controller (GLZMPD.SYS) ˇ Added support for the new Compaq PowerStorm 600 Graphics Controller Driver Version 04.06.01.44. Important: You must install Microsoft Windows NT Service Pack 4 before you install the Compaq PowerStorm 600 Graphics Controller Driver. Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP/Productiva G100 MMS Graphics Controllers (MGA64.SYS) ˇ Updated the Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP/Productiva G100 MMS Graphics Controller Driver to Version 4.00 (build 4.06.023). ˇ Added support for the Matrox Productiva G100 Multi-Monitor Series Graphics Controller. Important: You must install Microsoft Windows NT Service Pack 3 (or higher) before you install the Matrox Productiva G100 Multi-Monitor Series Graphics Controller Driver. Matrox MGA Millennium Graphics Controller (MGA64.SYS) ˇ Added support for the Matrox MGA Millennium Graphics Controller Driver Version 4.00 (build 3.60.116). Compaq PowerStorm 300 Graphics Controller (PBXGDAC.SYS) ˇ Updated the Compaq PowerStorm 300 Graphics Controller Driver from Version 2, 2, 1107, 1219 to 2, 2, 0211, 1434. Important: You must install Microsoft Windows NT Service Pack 3 (or higher) before you install the Compaq PowerStorm 300 Graphics Controller Driver. STB MVP Pro-128 Graphics Controller (MVPPRO.SYS) ˇ Updated the STB MVP Pro-128 Graphics Controller Driver from Version 1.11 to 2.10 9901071518. STB Mediator II Utility (MEDIATOR.EXE) ˇ Added the option to install the STB Mediator II Utility, Version 2.19, independent of the STB MVP Workstation or STB MVP Pro-128 Graphics Controller Driver installation. If your workstation includes an STB MVP Workstation or STB MVP Pro-128 Graphics Controller, you will have the option to install the STB Mediator II Utility in addition to installing the video driver. Compaq SMART Array/SMART-2 Array/Smart Array 221 Controller Driver (CPQARRAY.SYS) ˇ Updated the Compaq SMART Array/SMART-2 Array/Smart Array 221 Controller Driver from Version 4.01.03.30 to 4.01.03.36. ˇ Added support for the new Compaq Smart Array 221 Controller. Compaq Ethernet, Fast Ethernet, or Gigabit Controller(s) (N100NT.SYS) ˇ Updated the Compaq Ethernet, Fast Ethernet, or Gigabit Controller(s) Driver from Version 3.08.00.0004 to 4.29.01.0008. ˇ Added support for the following Compaq Fast Ethernet or Gigabit Controllers: ˇ Compaq NC3131 Fast Ethernet NIC ˇ Compaq NC3132 Fast Ethernet Module ˇ Compaq NC3133 Fast Ethernet Module ˇ Compaq NC6132 Gigabit Module ˇ Compaq NC6133 Gigabit Module Compaq Array Configuration Utility (CPQACU.EXE) ˇ Updated the Compaq Array Configuration Utility from Version 2.00 to 2.20. ˇ Added support for the new Compaq Smart Array 221 Controller. Compaq Advanced Wake-on-LAN Driver (CPQAWOL.SYS) ˇ Added support for the new Compaq Advanced Wake-on-LAN Driver Version 1.01. Compaq Remote ROM Flash and Security Settings Service (CPQRS.SYS) ˇ Updated the Compaq Remote ROM Flash and Security Settings Service Driver from Version 1.04 to 1.05. ˇ Fixed a problem on the Compaq Professional Workstation AP200, AP500, and SP700 with Remote Security fails when DMI Agents are installed. ATAPI/IDE Controller Driver (CPQATAPI.SYS) ˇ Updated the ATAPI/IDE Controller Driver to correct an MSATAPI driver configuration problem on workstations with Microsoft Windows NT Service Pack 3 (or higher) installed and on workstations with ATAPI/IDE Controllers greater than 8.4 GB. The problem is corrected automatically when you run the Workstation SSD for Windows NT Setup program. ˇ The ATAPI/IDE Controller Driver cannot be installed if the workstation has Microsoft Windows NT Service Pack 4 installed. Also, the driver cannot be installed if the workstation has Microsoft Windows NT Service Pack 3 installed and has an ATAPI/IDE Controller greater than 8.4 GB. Important: The ATAPI/IDE Controller Driver is not supported on the Compaq Professional Workstation SP700. If you used Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A or 2.01A with a Professional Workstation SP700 configured with an ATAPI/IDE Controller, run the Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version 2.04A Setup program to disable the CPQATAPI.SYS driver and enable the MSATAPI.SYS driver included in Microsoft Windows NT Service Pack 3 (or higher). For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT NTWSD.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: NTWSD.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.