SOFTPAQ NUMBER:  SP9630
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Workstation Support Software for Microsoft Windows NT 4.0
	(Files rather than diskettes)
VERSION:  2.03 Rev a
LANGUAGE:  Japanese

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  All Compaq Professional Workstations

OPERATING SYSTEM:  Microsoft Windows NT 4.0 (Japanese)

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  March 01, 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP9007

DESCRIPTION:  This SoftPaq is for Japanese products, and cannot be run 
in United States mode.  This SoftPaq creates two files -- a description 
file and a large self-extracting executable file.  The self-extracting 
executable file contains Compaq Workstation Support Software for 
Microsoft Windows NT 4.0 that supports the following subsystems and 
features of Compaq Professional Workstations:

   Adaptec AIC-78xx PCI SCSI Controller
   Compaq ATAPI/IDE Controller
   Compaq Ethernet or Fast Ethernet Network Interface Controllers
        Compaq Fast Ethernet NIC NC1120
	Compaq Fast Ethernet Embedded NIC NC3121
        Compaq Fast Ethernet NIC NC3120
        Compaq Fast Ethernet NIC NC3121
	Compaq Fast Ethernet NIC NC3161
   Compaq Netelligent/NetFlex-3 Family of Controllers
	Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller
	Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller
	Compaq Netelligent 10/100 TX Embedded UTP Controller
	Compaq NetFlex-3 Embedded Controller
	Compaq Netelligent 10/100 TX PCI UTP Controller
	Compaq Netelligent 10 T PCI UTP Controller
	Compaq Netelligent 10/100 TX PCI UTP Dual Port Controller
   Compaq NetFlex-3 network adapter monitoring, configuration and duplex
        utility
   Compaq ProLiant Storage System 
	Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller
	Compaq Wide-Ultra SCSI-3 Controller*
	Compaq 32-Bit Fast-SCSI-2 Controller
	Integrated 32-Bit Fast-SCSI-2/P Controller
	Integrated 32-Bit Fast-Wide SCSI-2/P Controller (formerly named the 32-Bit Wide-Ultra SCSI-2/P Controller)
	Adaptec AIC-78xx PCI SCSI Controller 
	Symbios Wide Ultra2 PCI SCSI Controller 
   Compaq SMART/SMART-2 Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller
        Compaq SMART 3100ES Controller
   Compaq System Management/Health Driver   
   Compaq Workstation Support Software Installation Utility
	Compaq PowerStorm 300 Graphics Controller
	Diamond Multimedia Fire GL 4000 Graphics Controller
	ELSA GLoria-L 3D Graphics Controller 
	ELSA GLoria-XL 3D Graphics Controller 
	ELSA GLoria Synergy 3D Graphics Controller 
	ELSA GLoria Synergy+ 3D Graphics Controller 
	ESS AudioDrive Controller
	Matrox Millennium II PCI Graphics Controller
	Matrox Millennium G200 PCI and AGP Graphics Controllers

Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.03 Rev. A

The release of the Compaq Workstation Support Software for Microsoft 
Windows NT 4.0, Version 2.03 Revision A, primarily supports the following 
new products:

-	Matrox Millennium G200 PCI Graphics Controller
-	Symbios Wide Ultra2 PCI SCSI Controller


Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP Graphics Controllers (MGA64.SYS)

-	Updated the Matrox Millennium II PCI/Millennium G200 PCI/Millennium 
G200 AGP Driver to Version 4.00 (build 4.0.152).
-	Added support for the Matrox Millennium G200 PCI Graphics Controller.
-	Allows mixing of the Matrox Millennium II PCI, Millennium G200 AGP, 
and Millennium G200 PCI graphics controllers in a single system for 
multi-monitor support.

Important:  The Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP 
Driver does not support the Matrox MGA Millennium Graphics Controller. To install 
the latest driver for the Matrox MGA Millennium Graphics Controller, use Compaq 
Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A. You can 
obtain Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version 
2.00A from the Compaq website (www.compaq.com/www.compaq.co.jp).

Symbios Wide Ultra2 PCI SCSI Controller (SYMC8XX.SYS) 

-	Added support for the new Symbios Wide Ultra2 PCI SCSI Controller Driver 
Version 4.08.00.

Compaq Remote ROM Flash and Security Settings Service (CPQRS.SYS)

-	Updated the Compaq Remote ROM Flash and Security Settings Service Driver 
from Version 1.01 to 1.04.
-	Added improved timers to the AMD ROM flash routines.

For details, refer to NTREADME.HLP in the created support files.


HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       NTWSD.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       NTWSD.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.