SOFTPAQ NUMBER: SP9577 PART NUMBER: 277147 FILE NAME: 874-5.bin TITLE: Deskpro EP/EN Series Video ROM for Millennium G100 Graphics Controller VERSION: 1.5.00 Rev A LANGUAGE: English CATEGORY: Drivers DIVISIONS: Desktops PRODUCTS AFFECTED: Deskpro EP/EN Series with Matrox Millennium G100 Graphics Controller (AGP) NOTE: To determine if your model has this controller -- In Windows 95/98, go to the Control Panel, then select the System icon, the Device Manager tab, and the Display adapters icon. In Windows NT, go to the Control Panel, then select Display, Settings, Display type. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: Matrox Millennium G100 Graphics Controller (AGP) EFFECTIVE DATE: January 15, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: N/A DESCRIPTION: This SoftPaq unpacks the files needed to install the video ROM for certain Deskpro EP/EN Series models that use a Matrox Millennium G100 Graphics Controller. This is an AGP (Accelerated Graphics Port) controller. Optionally allows an installation diskette to be created. IMPORTANT: The video ROM can only be installed from DOS Mode. It cannot be installed from a DOS session. This is the same version of the video ROM originally included in the affected Deskpro EP/EN Series models. It is not an upgrade. It is offered here as a convenience for customers who may need to restore the video ROM for any reason. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into a subdirectory named Disk_01 that is created under the download directory or the directory specified. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. The video ROM may be installed directly from the files on the hard drive or an optional installation diskette can be created. To create an installation diskette, run MAKEDISK.BAT. To install the video ROM, restart the computer in DOS Mode and run BIOS-5.BAT. IMPORTANT: This must be run from DOS Mode (not a DOS session). To install from the hard drive, enter: \disk_01\BIOS-5.BAT where is the drive and directory chosen in step 2 To install from the optional installation diskette, enter: A:\BIOS-5.BAT 5. Follow the on-screen instructions to complete the installation. 6. After a successful installation, you may delete the files unpacked in step 2 if you wish. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies