SOFTPAQ NUMBER: SP9574 FILE NAME: N/A PART NUMBER: 120388-001, 120389-001 TITLE: Deskpro EN/EP Windows NT Video Driver for STB Velocity 4400 AGP 2X VERSION: 1318 LANGUAGE: US English CATEGORY: Drivers DIVISIONS: Desktops PRODUCTS AFFECTED: Deskpro EN/EP models with the STB Velocity 4400 AGP 2X Graphics Controller, including the following models Deskpro EN models: 6450, 6400, 6350, 6333C, 6333, 6300CA, 6300C, 6300, 6266 Deskpro EP models: 6300A, 6300, 6266C, 6266, 6450, 6400, 6350, 6333C, 6333 NOTE: To determine if your model has this controller -- Go to the Control Panel, then select the System icon, the Device Manager tab, and the Display adapters icon. OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: STB Velocity 4400 AGP 2X Graphics Controller PREREQUISITES: N/A ELECTRONIC DISTRIBUTION ALLOWED: Yes EFFECTIVE DATE: February 8, 1999 SOFTPAQ UTILITY VERSION: 4.0 SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install the Windows NT video drivers for the STB STB Velocity 4400 AGP 2X Graphics Controller, which is used in certain models of the Deskpro EN and Deskpro EP Series. Optionally allows two installation diskettes to be created. Enhancements/Fixes: - Adds support for the System Software Manager tool 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and files are unpacked into subdirectories named Disk_01 and Disk_02 that are created under the download directory or the directory specified. 3. After the folders Disk_01 and Disk_02 have been created, you may delete the self-exctracting file downloaded in step 1. 4. The drivers may be installed directly from the folders on the download directory, or two driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. 5. To install a driver, run SETUP.EXE. For example, select Start, Run, then enter: \disk_01\setup where is the drive and directory chosen in step 2 Or, if installing from diskettes, enter: a:\setup Follow the on-screen instructions to complete the installation. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.