SOFTPAQ NUMBER: SP9569 PART NUMBER: 120384-001, 120385-001 TITLE: Matrox G100, Millennium G200, Millennium II AGP, and Mystique Video Driver for Windows 95/98 VERSION: 4.18.026 Rev G LANGUAGE: English, French, German, Italian, Spanish CATEGORY: Drivers DIVISIONS: Desktops PRODUCTS AFFECTED: Deskpro EN: 6450,6400,6350,6333C,6333,6300CA,6300C,6300,6266 Deskpro EP: 6450,6400,6350,6333C,6333,6300A,6300,6266C,6266 Deskpro SB: 6400,6350,6333,6300,6266 Deskpro 4000: 6333,6300MMX,6266MMX,6233X,6233MMX,6200,6180 Deskpro 6000: 6333,6300MMX,6266X,6266MMX,6233X,6233MMX,6200,6180 Deskpro 2000: 6300MMX,6266MMX,6233MMX,6200,6180 NOTE: This is for Deskpro models with one of the Matrox video controllers listed below. One of the Matrox video controllers could also be installed as an option in Deskpro models other than the models listed above. To determine if your desktop unit has one of the affected Matrox video controllers, click on the System icon in the Windows NT Control Panel, the Device Manager tab, and the Display Adapters icon. OPERATING SYSTEM: Microsoft Windows 95, Microsoft Windows 98 SYSTEM CONFIGURATION: Matrox MGA-G100 Matrox MGA-G200 Matrox Millennium II AGP Matrox Mistique PREREQUISITES: N/A EFFECTIVE DATE: March 22, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 4.0 SUPERSEDES: SP9003 DESCRIPTION: Unpacks the files needed to install the Microsoft Windows 95/98 video drivers for the Matrox G100, Millennium G200, Millennium II AGP, and Mystique video controllers used in Deskpro computers. Optionally creates two installation diskettes. Enhancements/Fixes: - Adds support for System Software Manager HOW TO USE: 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and folders are created in the download directory or the directory specified. 3. After the folders disk_01, disk_02 and disk_03 have been created, you may delete the self-exctracting file downloaded in step 1. 4. The driver may be installed directly from the folders in the download directory, or three driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. To read detailed installation and usage instructions, refer to README.TXT. 5. To install the driver, run SETUP.EXE from the first installation diskette or from directory disk_01 if installing from the hard drive. For example, select Start, Run, then enter: \disk_01\setup where is the drive and directory chosen in step 2 6. Follow the on-screen instructions to complete the installation. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.