SOFTPAQ NUMBER:  SP9403
PART NUMBER:  386298-002, 386299-002
FILE NAME:  N/A
TITLE:  Workstation Millennium G200/Millennium II Drivers for Windows NT 4.0
VERSION:  3.60 Rev B
VENDOR VERSION NUMBER: 3.60.150
LANGUAGE:  English, French, Italian, German

CATEGORY:  Drivers

DIVISIONS:  Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation 5100, 6000, 8000, AP200, 
	  	    AP400, AP500, or SP700 using the Millennium II Graphics 
		    Controller;
		    Compaq Professional Workstation AP200, AP400, AP500, or
		    SP700 using the Millennium G200 Graphics Controller
             NOTE:  The Millennium II and Millennium G200 Graphics Controllers 
                    are standard equipment on selected Workstation models only, 
                    but could be an option installed on other models.

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  Millennium G200 or Millennium II Graphics Controller

PREREQUISITES:  N/A 

EFFECTIVE DATE:  December 23, 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  SP8462

DESCRIPTION:  Creates the two-diskette set, "Workstation Millennium 
G200/Millennium II Drivers for Windows NT 4.0," for the above-mentioned 
Compaq Workstations.

Enhancements/Fixes:  
 - Allows mixing the Millennium G200 Graphics Controller (AGP) with one 
   or more Millennium II Controllers (PCI) for multi-monitor configurations, 
   even when the driver is installed using the standard NT Display Properties.  
   (The earlier driver version allowed this mixing only if it was installed 
   using the SETUP.EXE program.)

HOW TO USE:

1.  Obtain 2 formatted 1.44-MB diskettes.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  You will be prompted to insert the formatted diskettes 
in a drive to create the diskettes.

4.  After the diskettes have been created, you may delete the SoftPaq file 
downloaded in step 2.

5.  To Install, see READMENT.TXT on the first diskette.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies