SOFTPAQ NUMBER:  SP9386
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Armada Specific Models S3 M5 Video Driver for Windows NT 4.0  
VERSION:  3.25.22 Rev D 
LANGUAGE:  Taiwan

CATEGORY:  Display

DIVISION:  Portables

PRODUCTS AFFECTED:  Compaq Armada 7400 6333/T/6.4/D/M/1
		    Compaq Armada 7400 6333/T/6.4/D/0/1
		    Compaq Armada 7400 6333/T/6.4/D/M/3
		    Compaq Armada 7400 6333/T/6.4/D/0/3
		    Compaq Armada 7400 6366/T/10.0/V/M/1
		    Compaq Armada 7400 6366/T/10.0/V/0/1
		    Compaq Armada 7400 6366/T/10.0/V/0/3
		    Compaq Armada 7400 6366/T/10.0/V/M/3
		    Compaq Armada 7400 6366/T14/10.0/V/M/1
		    Compaq Armada 7400 6366/T14/10.0/V/0/1
		    Compaq Armada 7400 6366/T14/10.0/V/M/3
		    Compaq Armada 7400 6366/T14/10.0/V/0/3
		    Compaq Armada 7800 6366/T/14.0/V/M/1
		    Compaq Armada 7800 6366/T/14.0/V/0/1
		    Compaq Armada 7800 6366/T/14.0/V/M/3
		    Compaq Armada 7800 6366/T/14.0/V/0/3
		    Compaq Armada 7800 6400/T14/14.0/V/M/1
		    Compaq Armada 7800 6400/T14/14.0/V/0/1
		    Compaq Armada 7800 6400/T14/14.0/V/M/3
		    Compaq Armada 7800 6400/T14/14.0/V/0/3

OPERATING SYSTEM:  Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  8 Feb 1999

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.0

SUPERSEDES:  SP7837-SP7851 

DESCRIPTION:  Unpacks the files needed to install the Armada 
Specific Models S3 M5 Video Driver for Windows NT 4.0 for the
models listed above in PRODUCTS AFFECTED.  Optionally creates 
an installation diskette.

Enhancements/Fixes:  - Resolves issue with black screen in Windows NT 
		       while loading CardWare.
		     - Corrected problem of CRT turning off while the 
		       system is booted in the docking station with the
		       panel down.
		     - Corrected problem with CRT being blank after 
		       hibernation when LCD(16X12) and CRT(6X4) are in
		       DUO views.

HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the 1 optional installation diskette, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install from diskette, follow the steps in the README.TXT file.
To install from the download directory, follow the steps in the README.TXT
file.  However, for the location of the installation software, specify
the complete path to the unpacked files from step 2 above.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1999, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies