SOFTPAQ NUMBER: SP9460 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Workstation Support Software for Microsoft Windows NT 4.0 (All component drivers) VERSION: 2.03 Rev a LANGUAGE: English CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: All Compaq Professional Workstations OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 01 FEBRUARY 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP8780 DESCRIPTION: This SoftPaq creates two files -- a description file and a large self-extracting executable file. The self-extracting executable file contains Compaq Workstation Support Software for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Professional Workstations: Adaptec AIC-78xx PCI SCSI Controller Compaq ATAPI/IDE Controller Compaq Ethernet or Fast Ethernet Network Interface Controllers Compaq Fast Ethernet NIC NC1120 Compaq Fast Ethernet Embedded NIC NC3121 Compaq Fast Ethernet NIC NC3120 Compaq Fast Ethernet NIC NC3121 Compaq Fast Ethernet NIC NC3161 Compaq Netelligent/NetFlex-3 Family of Controllers Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller Compaq Netelligent 10/100 TX Embedded UTP/AUI Controller Compaq Netelligent 10/100 TX Embedded UTP Controller Compaq NetFlex-3 Embedded Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Dual Port Controller Compaq NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq ProLiant Storage System Compaq Dual Channel Integrated Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller* Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller (formerly named the 32-Bit Wide-Ultra SCSI-2/P Controller) Adaptec AIC-78xx PCI SCSI Controller Symbios Wide Ultra2 PCI SCSI Controller Compaq SMART/SMART-2 Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq SMART 3100ES Controller Compaq System Management/Health Driver Compaq Workstation Support Software Installation Utility Compaq PowerStorm 300 Graphics Controller Diamond Multimedia Fire GL 4000 Graphics Controller ELSA GLoria-L 3D Graphics Controller ELSA GLoria-XL 3D Graphics Controller ELSA GLoria Synergy 3D Graphics Controller ELSA GLoria Synergy+ 3D Graphics Controller ESS AudioDrive Controller Matrox Millennium II PCI Graphics Controller Matrox Millennium G200 PCI and AGP Graphics Controllers Matrox Productiva G100 Multi-Monitor Series (MMS) Graphics Controller STB Systems MVP PRO 128 Graphics Controller STB Systems MVP Workstation Graphics Controller Enhancements/Fixes: Features in Compaq Workstation SSD for Windows NT 4.0 Version 2.03 Rev. A The release of the Compaq Workstation Support Software for Microsoft Windows NT 4.0, Version 2.03 Revision A, primarily supports the following new products: - Matrox Productiva G100 Multi-Monitor Series Graphics Controller - Matrox Millennium G200 PCI Graphics Controller - Symbios Wide Ultra2 PCI SCSI Controller Matrox Productiva G100 MMS Graphics Controller (MGA64.SYS) - Added support for the new Matrox Productiva G100 Multi-Monitor Series Graphics Controller Driver Version 4.00 (build 4.0.9). Important: You must install Microsoft Windows NT Service Pack 3 (or higher) before you install the Matrox Productiva G100 Multi-Monitor Series Graphics Controller Driver. Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP Graphics Controllers (MGA64.SYS) - Updated the Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP Driver to Version 4.00 (build 4.0.152). - Added support for the Matrox Millennium G200 PCI Graphics Controller. - Allows mixing of the Matrox Millennium II PCI, Millennium G200 AGP, and Millennium G200 PCI graphics controllers in a single system for multi-monitor support. Important: The Matrox Millennium II PCI/Millennium G200 PCI/Millennium G200 AGP Driver does not support the Matrox MGA Millennium Graphics Controller. To install the latest driver for the Matrox MGA Millennium Graphics Controller, use Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A. You can obtain Compaq Workstation Support Software for Microsoft Windows NT 4.0 Version 2.00A from the Compaq website (www.compaq.com). Symbios Wide Ultra2 PCI SCSI Controller (SYMC8XX.SYS) - Added support for the new Symbios Wide Ultra2 PCI SCSI Controller Driver Version 4.08.00. Compaq Remote ROM Flash and Security Settings Service (CPQRS.SYS) - Updated the Compaq Remote ROM Flash and Security Settings Service Driver from Version 1.01 to 1.04. - Added improved timers to the AMD ROM flash routines. For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT NTWSD.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: NTWSD.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.