SOFTPAQ NUMBER: SP8905 PART NUMBER: 400597-192, 400598-192 FILE NAME: N/A TITLE: Workstation Compaq PowerStorm 300 Drivers for Windows NT 4.0 (Japanese) VERSION: 2.21J Rev A VENDOR VERSION NUMBER: 2,2,1107A,1219,4.0.0 LANGUAGE: Japanese CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation AP500 or SP700 using the Compaq PowerStorm 300 Graphics Controller. NOTE: The Compaq PowerStorm 300 Graphics Controller is standard equipment on selected Workstation models only, but could be an option installed on other models. OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: Compaq PowerStorm 300 Graphics Controller EFFECTIVE DATE: November 20, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: N/A DESCRIPTION: Creates the 2-diskette set, "Workstation PowerStorm 300 Drivers for NT 4.0 (Japanese)" which contains the NT 4.0 drivers for the graphics card used in the above-mentioned Professional Workstations. This is the same version of this driver that was originally included on the affected Workstation AP500 and SP700 models. It is not an update. It is offered here as a convenience to customers who may need to restore the driver to their computer for any reason. HOW TO USE: 1. Obtain 2 formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. To Install, see A:\README.TXT on the second created diskette. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies