SOFTPAQ NUMBER: SP8735 PART NUMBER: N/A FILE NAME: N/A TITLE: Armada Specific Models System Enhancements for Windows 98 VERSION: 1.00 Rev A LANGUAGE: Swedish CATEGORY: Drivers DIVISIONS: Portables PRODUCTS AFFECTED: Compaq Armada 7400 6266/T/4000/D/0/1 Compaq Armada 7400 6266/T/4000/D/0/3 Compaq Armada 7400 6300/T/6000/D/M/1 Compaq Armada 7400 6300/T/6000/D/0/1 Compaq Armada 7400 6300/T/6000/D/0/3 Compaq Armada 7800 6266/T/5000/D/M/1 Compaq Armada 7800 6266/T/5000/D/0/1 Compaq Armada 7800 6266/T/5000/D/0/3 Compaq Armada 7800 6266/T/8000/D/M/1 Compaq Armada 7800 6266/T/8000/D/0/1 Compaq Armada 7800 6266/T/8000/D/0/3 Compaq Armada 7800 6300/T/8000/V/M/1 Compaq Armada 7800 6300/T/8000/V/0/1 Compaq Armada 7800 6300/T/8000/V/0/3 Compaq Armada 7300 Series Compaq Armada 7700 Series Compaq Armada 4200 Series Compaq Armada 3500 6333/T/4000/0/0/1 Compaq Armada 3500 6333/T/4000/0/0/2 Compaq Armada 3500 6333/T/4000/0/0/3 Compaq Armada 3500 6366/T/6400/0/0/1 Compaq Armada 3500 6366/T/6400/0/0/2 Compaq Armada 3500 6366/T/6400/0/0/3 OPERATING SYSTEM: Microsoft Windows 98 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 02 October 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install the Armada Specific Models System Enhancements for Windows 98 for the models listed above in PRODUCTS AFFECTED. Optionally creates an installation diskette. This version is the initial release of this utility for the models listed above. Enhancements/Fixes: N/A HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory. All files are unpacked into this newly created directory. To create the 1 optional installation diskette, run MAKEDISK.BAT and follow on-screen instructions. 3. After the directory has been created, you may delete the self-extracting file downloaded in step 1. 4. To install, run SETUP.EXE. For example, enter: \setup where is the drive and directory created in step 2 - or - a diskette drive letter if using the optional installation diskette Follow the on-screen instructions. 5. After the installation is completed, you may delete the directory created in step 2 if you wish. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies