SOFTPAQ NUMBER: SP8642 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Microcom 420 56K PC Card Fax Modem V.90 Firmware Update VERSION: 2.100D4.C LANGUAGE: English CATEGORY: ROMPaq DIVISIONS: Comm-Network PRODUCTS AFFECTED: Compaq Microcom 420 56K PC Card Fax Modem OPERATING SYSTEM: Microsoft Windows 98, Windows 95, Windows 3.1, or Windows NT 4.0 SYSTEM CONFIGURATION: - IBM Compatible 486DX2/66 or greater with 4-MB system RAM; - at least 5MB of free hard disk space; - Compaq Microcom 420 56K PC Card Fax Modem installed in a PCMCIA slot PREREQUISITES: To complete the update to the ITU V.90 Standard, you must also have the Compaq Microcom 56K PC Card Fax Modem Installation Software Diskette, Version 1.10 or later (Version 1.10 is available in SoftPaq SP8641 on the Compaq Website). EFFECTIVE DATE: November 1, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: N/A DESCRIPTION: Unpacks the files necessary for the V.90 firmware update of Compaq Microcom 420 56K PC Card Fax Modems (see PREREQUISITES above). HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to confirm (or change) the name and location of the directory, into which the files contained in the Softpaq will be expanded. 3. After expansion, you may delete the SoftPaq file downloaded in step 1 above. 4. Use a text editor to read and print the README.TXT file, which can be found in the directory where the SoftPaq files were expanded. This file contains detailed instructions on how to update your modem's firmware. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.