SOFTPAQ NUMBER: SP8587 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Remote Access Server 5601 Firmware and Driver Upgrade VERSION: 3.00 Rev A LANGUAGE: US English CATEGORY: Drivers DIVISIONS: Comm-Network PRODUCTS AFFECTED: Compaq Remote Access Server 5601 OPERATING SYSTEM: Windows NT 4.0 Server SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 15, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.x SUPERSEDES: N/A DESCRIPTION: Unpacks the files necessary to upgrade the firmware and drivers for the multi-port digital modem and ISDN adapter on a Compaq Remote Access Server 5601. Enhancements/Fixes: - V.90 Modem Support New features include a modem firmware upgrade to support the new industry standard V.90 modem and K56Flex protocols for 56K modem operation. The enhanced firmware provides the fastest modem connections possible when used with V.90-compliant modems. - Fractional T1 Support Over PRI or Robbed-Bit These features allow the RAS server to use line interfaces configured with less than the maximum number of configured bearer channels. This can substantially reduce the monthly cost of the WAN connection for sites with smaller bandwidth requirements. - Called Party Number Service Selection Support (CPNSS) CPNSS allows incoming ISDN calls with "voice bearer coding" to be answered as digital synchronous PPP sessions instead of automatically connecting them to modems. This feature can reduce telephone line charges in areas where voice calls are tariffed at a lower rate than data calls. Additionally, digital calls on non-ISDN (T1 robbed-bit) spans are supported. Previously these were all treated as modem calls. Extensibility via Third-Party Software Like all Windows NT-based servers, the Compaq Remote Access Server line is extensible via third-party software. ******************************************************************************************* * IMPORTANT NOTE: * * * * Technical Support for all third-party applications not supplied by Compaq should * * be obtained by contacting the vendor of that software. Compaq cannot provide technical * * support for third-party applications that are not preinstalled by the factory on your * * Remote Access Server. * ******************************************************************************************* Enhancing System Security Security Dynamics SecurID Support The new WAN drivers in this Softpaq provide support for Security Dynamics ACE/Server version 3.3.3 and the ACE/Agent for NT. All token types and SecurID modes are supported, including "new pin" and "next tokencode." Due to architectural limitations, SecurID will not function in the following scenarios: 1. SecurID over synchronous ISDN connections. SecurID will function only over asynchronous analog connections. 2. Dial-on-demand connections. PAP and CHAP authentication protocols do not support the additional information required by the SecurID authentication process. 3. SecurId negotiation during the establishment of VPN tunnels. To take advantage of SecurId support, the third party application, SecurID, is required. This software is not supplied with your server and must be purchased separately through Security Dynamics. COM Port Support The addition of COM ports to the Compaq Remote Access Server line allows for a variety of third-party applications to be added to the server. For example: - Modem Pooling Software Modem Pooling Software provides a LAN or remote user with convenient access to dial-out modems from their desktop. Allowing users to use modems across the network saves the costs of provisioning an analog line to each desktop and installing a modem in each client PC. - Outbound Fax Applications Network fax applications allow users to send faxes straight from their desktops without the need for local modems or analog phone lines. HOW TO USE THIS SOFTPAQ: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Enter "Y" to confirm the unpacking of files into the download directory. 3. After the files have been unpacked, you may delete the self-extracting file downloaded in step 1. 4. For installation instructions, refer to the README.TXT file in the created directory. 5. After the installation is completed, you may delete the files unpacked in step 2. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies