SOFTPAQ NUMBER: SP8532 PART NUMBER: 276672-40A FILE NAME: N/A TITLE: Compaq Server Support for Microsoft Windows NT 3.51 VERSION: 1.34 Rev A LANGUAGE: English CATEGORY: Drivers DIVISIONS: Systems PRODUCTS AFFECTED: All Compaq Servers OPERATING SYSTEM: Microsoft Windows NT Version 3.51 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 18 DEC 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: SP7745 DESCRIPTION: This SoftPaq creates the Compaq Server Support (SSD) for the Microsoft Windows NT 3.51 diskettes. There are a total of three diskettes with this release. The SSD supports the following subsystems and features of Compaq Servers: ATI Rage IIC Video Display Controller Compaq Advanced Network Control Utility Compaq Ethernet or Fast Ethernet Controllers Compaq NC1120 Ethernet NIC Compaq NC3120 Fast Ethernet NIC Compaq NC3122 Fast Ethernet NIC Compaq NC3160 Fast Ethernet NIC Compaq 4/8-GB SLR Tape Driver Compaq HAL Support (Uniprocessor and Multiprocessor) Compaq Integrated Management Display Utility Compaq Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX Embedded UTP/Coax Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq NetFlex/NetFlex-2 Family of Controllers Compaq NetFlex ENET-TR Controller Compaq NetFlex ENET/ISA Controller Compaq NetFlex-2 ENET-TR Controller Compaq NetFlex-2 TR Controller Compaq NetFlex-2 DualPort ENET Controller Compaq NetFlex-2 DualPort TR Controller Integrated NetFlex ENET-L Controller Integrated NetFlex ENET/PCI Controller Compaq NetFlex-3 Family of Controllers Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq ProLiant Storage Systems Compaq Recovery Server, Standby Agent with SMART-2 Support Compaq Recovery Server, Online Agent with SMART-2 Support Compaq Remote Insight Board/PCI Driver Compaq Remote Insight Board/PCI WAN Driver Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq Dual Wide-Ultra SCSI-3 Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq Server Support Installation Utility Compaq SMART/SMART-2 Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Array Controllers Compaq SMART-2/P and Compaq SMART-2/E Array Controllers Compaq SMART-2DH Array Controller Compaq SMART-2SL Array Controller Compaq Smart Array 3100ES Controller Compaq Smart Array 3200 Controller Compaq System Management/Health Driver The following diskettes can be created using the files that result when the SoftPaq is unbundled: Disk 1 - Compaq Server Support for Microsoft NT 3.51 Disk #1 Disk 2 - Compaq Server Support for Microsoft NT 3.51 Disk #2 Disk 3 - Compaq Server Support for Microsoft NT 3.51 Disk #3 Enhancements/Fixes: The release of the Compaq Server Support for Microsoft Windows NT 3.51 Version 1.34A includes updates to the Compaq Remote Insight Board PCI WAN Driver, the Compaq System Management Driver, and the Compaq Server Support Setup for Microsoft Windows NT 3.51 program. Compaq 4/8-GB SLR Tape Driver(TANDQIC.SYS) - Removed the Compaq 4/8-GB SLR Tape Driver files from the Compaq SSD for Windows NT 3.51 release. These files are available from the Compaq Web site at www.compaq.com as SoftPaq number 5982. Compaq Remote Insight Board Driver(CPQRIB.SYS) - Updated the Compaq Remote Insight Board Driver version from 1.50 to 1.51. Version 1.51 corrects an issue where the previous version of the Compaq Remote Insight Board Driver would not start on a multiprocessor Compaq ProLiant 3000 or 5500 configured as follows: Compaq Remote Insight Board/EISA and system ROM dated later than 3/98. Compaq Remote Insight Board/PCI WAN Driver(RIBWAN.SYS) - Updated the RIBWAN.INF file to re-enable the Compaq Remote Insight Board/PCI Driver and the Compaq Remote Insight Board/PCI WAN Driver after these drivers are installed and removed using Compaq Server Support Setup for Microsoft Windows NT then reinstalled through the Windows NT Control Panel using the RIBWAN.INF file. - Fixed a Compaq Remote Insight Board/PCI WAN routing issue. In the Compaq Remote Insight Board User Guide, you are asked to perform the "route add A B" command, where A and B are IP addresses. In previous Compaq SSD for Windows NT 3.51 versions, the packets destined for target A are not routed through the device properly if B is an IP address on one of the Compaq Remote Insight Board/PCI WAN endpoints. Beginning in Compaq SSD for Windows NT 3.51 Version 1.34A, the packets destined for IP address A are properly routed through IP address B, which is the Compaq Remote Insight Board/PCI WAN device. Compaq Server Support Setup for Microsoft Windows NT 3.51(SETUP.EXE) - Changed the path where Compaq Server Support Setup for Microsoft Windows NT 3.51 searches for the Compaq Array Configuration Utility files on the Compaq SmartStart and Support Software CD. Beginning in Compaq Server Support for Microsoft Windows NT 3.51 Version 1.34A, you can install the Compaq Array Configuration Utility not only from the Compaq Array Configuration Utility Diskettes but also from the Compaq SmartStart and Support Software CD. In Compaq Support Software for Microsoft Windows NT 3.51 Versions 1.30A through 1.32A, only the diskettes can be used to install the Compaq Array Configuration Utility. - Added a new popup, indicating the supported version of the Compaq Array Configuration Utility that is supported in this Compaq SSD for Windows NT 3.51 release, which will appear after the option to install the utility has been selected. - Removed the capability for Compaq Server Support Setup for Microsoft Windows NT 3.51 Version 1.34A (or later) to operate on Compaq Professional Workstation products. - Modified Compaq Server Support Setup for Microsoft Windows NT 3.51 to prompt you to update the Compaq Remote Insight Board/PCI WAN Driver after installing RAS to ensure that a registry setting created by the RAS install has the correct value for this driver. If this driver is not updated after a RAS install is performed, the registry value will be incorrect, disabling the "route add A B" command functionality that was fixed in this release (see the "Compaq Remote Insight Board/PCI WAN Driver(RIBWAN.SYS)" entry in this section). - Modified Compaq Server Support Setup for Microsoft Windows NT 3.51 to create the correct registry information for the NC3122 Fast Ethernet NIC upon an install or an update of the driver. Compaq Server Support Setup for Microsoft Windows NT 3.51 Version 1.32A incorrectly creates the registry strings for the Compaq NC3122 Fast Ethernet NIC. If your system is also configured with a Compaq NetFlex-3 Controller, network errors may occur after reboot. The modifications included in Compaq SSD for Windows NT 3.51 Version 1.34A prevent the network errors from occurring in the following cases: -If the Compaq Ethernet or Fast Ethernet Controller Driver has never been installed or updated on your system -If your system is not configured with a Compaq NetFlex-3 Controller Compaq System Management Driver(SYSMGMT.SYS) - Updated the Compaq System Management Driver version from 3.12.01 to 3.15.01. Version 3.15.01 of the Compaq System Management Driver corrects the loss of system fan, thermal, power supply, and ECC monitoring that Version 3.12.01 causes on the following systems: Compaq ProLiant 800 6/350 Compaq ProLiant 1600 (Models 6/350, 6/400, and 6/450-1) Compaq ProLiant 1600R (Models 6/400 and 6/450-1) - Removed support for all models of the Compaq Professional Workstation. Full support for the Compaq Professional Workstation series is now available on Compaq Workstation Support Software for Microsoft Windows NT 3.51 Version 1.00 (or later). - Corrected the display of erroneous data in the Compaq Insight Manager console. This invalid data appeared when a 400-Watt Hot Plug Redundant Power Supply Upgrade Kit was installed on the following systems: Compaq ProLiant 1600 6/350-1 Compaq ProLiant 1600 6/400-1 Compaq ProLiant 1600R 6/400-1. For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Obtain three formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP8532.EXE. 3. From that drive and directory, execute the downloaded SoftPaq file: SP8532 [ENTER] and follow the on-screen instructions. The following files will be created: QRST5.EXE 276672US._01 276672US._02 276672US._03 276672US.DOC 4. Please read 276672US.DOC for instructions on using QRST5 to create the diskettes and for the steps to install the software. 5. After the disks are created, you may delete the downloaded file SP8532.EXE and the other files it created from your hard drive if you wish. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies