SOFTPAQ NUMBER: SP8155 PART NUMBER: 276209-006, 276210-006 FILE NAME: N/A TITLE: Workstation Millennium/Millennium II Drivers for Windows 95/98 VERSION: 4.12 Rev A VENDOR VERSION NUMBER: 4.12.013 LANGUAGE: English, French, Italian, German CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation 5100, 6000, 8000, AP200, or AP400 using the Millennium II Graphics Controller NOTE: The Millennium and Millennium II Graphics Controllers are standard equipment on selected Workstation models only, but could be an option installed on other models. OPERATING SYSTEM: Microsoft Windows 95; Microsoft Windows 98 SYSTEM CONFIGURATION: Millennium or Millennium II Graphics Controller PREREQUISITES: N/A EFFECTIVE DATE: August 17, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP6873 DESCRIPTION: Creates the two-diskette set, "Workstation Millennium/Millennium II Drivers for Windows 95/98," for the Workstation models defined above. Enhancements/Fixes for Windows 95 driver: - Added a new pattern for the AGP 2X test to detect problems with certain Compaq and Dell systems. - Fixed improper memory returned to PowerDesk with G100 and some memory modules. HOW TO USE: 1. Obtain 2 formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. To Install, refer to the file README.TXT on the first diskette. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies