SOFTPAQ NUMBER: SP8036 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 4.0 (Files rather than diskettes) VERSION: 2.09 Rev A LANGUAGE: Japanese CATEGORY: Drivers DIVISIONS: Systems Workstations PRODUCTS AFFECTED: Compaq ProLiant, ProSignia and SystemPro Servers; Compaq Professional Workstations OPERATING SYSTEM: Microsoft Windows NT 4.0 (Japanese) SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: August 5, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP7667 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. This SoftPaq creates two files -- a description file and a large self-extracting executable file. The self-extracting executable file contains Compaq Support Software for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Professional Workstations and ProLiant and ProSignia Servers. Adaptec AIC-78xx PCI SCSI Controller ATI Rage IIC Graphics Controller Compaq ATAPI/IDE Controller Compaq Cluster Verification Utility Compaq Ethernet or Fast Ethernet Network Interface Controllers Compaq Fast Ethernet Embedded NIC NC3121 Compaq Fast Ethernet NIC NC3120 Compaq Fast Ethernet NIC NC3121 Compaq Fibre Channel Storage System Compaq Fibre Channel Filter Driver Compaq 4/8-GB SLR Tape Driver Compaq Integrated Management Display Utility Compaq Integrated Management Log Viewer Compaq Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq Online Storage Controller Recovery Utility Compaq PCI Hot Plug Utility Compaq Power Down Manager Compaq Power Supply Viewer Compaq ProLiant Storage System Compaq Recovery Server, Standby Agent with SMART-2 Support Compaq Recovery Server, Online Agent with SMART-2 Support Compaq Remote Insight Board Driver Compaq Remote Insight Board WAN Driver Compaq Remote Monitor Service Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Compaq Smart/Smart-2 Family of Array Controllers Compaq Smart/IDA-2/IDA/IAES Controllers Compaq Smart-2/P and Compaq Smart-2/E Controllers Compaq Smart-2DH Controller Compaq Smart-2SL Controller Compaq Smart 3100ES Controller Compaq Support Software Installation Utility Compaq System Management/Health Driver Diamond Multimedia Fire GL 4000 Graphics Controller ELSA Gloria-L 3D Graphics Controller ELSA Gloria-Synergy 3D Graphics Controller ELSA Gloria-Synergy+ 3D Graphics Controller ELSA Gloria-XL 3D Graphics Controller ESS AudioDrive Audio Controller Matrox Millennium/Millennium II Graphics Controller 3MODE Floppy Driver Enhancements/Fixes: The release of the Compaq Support Software for Microsoft Windows NT 4.0, Version 2.09 Revision A, primarily supports a new ELSA GLoria-Synergy/Synergy + 3D Graphics Controller driver. Compaq Support Software Setup for Microsoft Windows NT(SETUP.EXE) Replaced the OEMSETUP.INF file with the CPQATAPI.INF file for the Compaq ATAPI/IDE Controller. Added Compaq Support Software Setup support for the Compaq ATAPI/IDE Controller. Compaq System Management Driver(SYSMGMT.SYS) Updated the Compaq System Management driver version from 3.06.01 to 3.09.01. ELSA GLoria-Synergy/Synergy + 3D Graphics Controller(EGLPM.SYS) Added support for the new ELSA GLoria-Synergy/Synergy + 3D Graphics Controller driver Version 5.33.00.310.2. This new driver includes OpenGL Version 2.01.13.072, Dual Monitor Support, and updated tools. It also corrects single screen start-up and 3D Studio Max R2 application issues. For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT NTSSD.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: NTSSD.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.