SOFTPAQ NUMBER: SP8225 PART NUMBER: N/A FILE NAME: N/A TITLE: Armada 6500 ROMPaq Update Diskette VERSION: System ROM 1.50, Keyboard ROM AA5534 LANGUAGE: US English CATEGORY: ROMPaqs DIVISIONS: Portables PRODUCTS AFFECTED: Compaq Armada 6500 Series OPERATING SYSTEM: Microsoft Windows 95, Microsoft Windows 98, Microsoft Windows NT SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 19, 1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP8224 DESCRIPTION: Unpacks a file that, when run from the hard drive, creates a bootable diskette that can update the System ROM on Armada 6500 Series notebooks to version 1.50. This also updates the keyboard ROM to version AA5534 if needed. Enhancements/Fixes: - Updated Keyboard ROM to AA5534 to enable support for battery swapping while in suspend mode. This version includes the following enhancements that were also implemented in previous ROM versions 1.36 and 1.45: - Corrects an issue which prevented data from being properly written back to the hard drive media prior to shut down. - Updates the time of day after Password Quick Lock (pressing Fn-F6). - Eliminates system lockup or failure to boot when "Save to Disk" suspend mode is enabled. - Resolves system lockups after initiating "Save to Disk" under DOS Safe Mode. - Corrects system lockups when Fast Infrared Port is configured to certain System Resources. - Addresses system lockups that could occur when hot swapping Multibay devices upon resume from standby under Microsoft Windows '98. - Addresses issue that prevented the system from entering Stanby Timeout when docked with a DVD drive installed in the Mobile Convenience Base. - Corrects issues with proper memory size detection. HOW TO USE: IMPORTANT: You must use the AC adapter (NOT battery power) while performing this update. If the notebook loses power during the update, it will not function. 1. Download the SoftPaq (SP8225.EXE) to a temporary directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Enter "Y" to confirm the unpacking of files into the download directory. A file named 6500A150.EXE will be unpacked. 3. After the file has been unpacked, you may delete the file downloaded in step 1. 4. To update the System ROM to version 1.50, and the keyboard ROM to AA5534, do the following: NOTE: The update process may require two reboots from the bootable diskette. a. Run the file \biosA150\6500A150.EXE directly from your hard drive. this file will create a bootable diskette for you. (You will need a blank formatted diskette in drive a:) b. Boot from the created diskette. Follow the on-screen instructions, The updates will run only if the notebook needs them. The keyboard ROM will be updated first if it is needed. After that update completes, leave the diskette in A: (the notebook may reboot). c. Allow the notebook to boot from the created diskette again. Follow the on-screen instructions. The System ROM update will proceed automatically. After the System ROM update completes, remove the diskette and reboot. IMPORTANT: After running the update you may need to reload the System ROM defaults. If during the final reboot you are prompted to "Press Fn-F3 to enter Setup," simultaneously press the Fn key and the F3 key. When in the ROM Setup program, press the F9 key to reload the System ROM default settings. When prompted for confirmation, choose YES. Do not make any other changes unless instruced to do so by your network administrator. Inappropiate changes may prevent the notebook from working properly. Press the F10 key to exit the ROM Setup program. 5. After the utility has been run, you may delete the file from the download directory if you wish. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.