SOFTPAQ NUMBER: SP7059 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 4.0 (Workstations) VERSION: 2.08 Rev A LANGUAGE: Japanese CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstations OPERATING SYSTEM: Microsoft Windows NT 4.0 (Japanese) SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: July 13, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP7059 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. This SoftPaq creates two files -- a description file and a self-extracting executable file. The self-extracting executable file contains Compaq Support Software for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Professional Workstations: System Management/Health driver Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq 10/100 TX Embedded Intel WOL UTP Controller Compaq 10/100 TX PCI Intel UTP Controller SMART Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Diamond Multimedia Fire GL 4000 Graphics Controller ELSA Gloria-L 3D Graphics Controller ELSA Gloria-Synergy 3D Graphics Controller ELSA Gloria-Synergy+ 3D Graphics Controller ELSA Gloria-XL 3D Graphics Controller ESS AudioDrive Audio Controller Matrox Millennium/Millennium II Graphics Controller Compaq Support Software Installation utility 3MODE Floppy Driver Enhancements/Fixes: The release of the Compaq Support Software for Microsoft Windows NT 4.0, Version 2.08 Revision A, primarily supports the following new products: the Compaq ProLiant 1850R, the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, the Compaq ProLiant 7000 400-1024K Model 1S-256, and the Compaq Professional Workstation AP200. Adaptec AIC-78xx PCI SCSI Controller(AIC78XX.SYS) Added support for the new Adaptec AIC-78xx PCI SCSI Controller driver, which is only supported on the Compaq Professional Workstation AP200. For more information on this driver, refer to the section entitled Adaptec AIC-78xx PCI SCSI Controller. ATI RAGE IIC Graphics Controller(ATI.SYS) Added support for the new ATI RAGE IIC Graphics Controller driver. The Compaq Professional Workstations and/or Compaq Servers that may use this driver are indicated in the section entitled Video Support for Compaq Professional Workstations and Compaq Servers. Compaq ATAPI/IDE Controller(CPQATAPI.SYS) Added support for the new Compaq ATAPI/IDE Controller driver version 2.21.1, which is only supported on the Compaq Professional Workstation AP200. For more information about this driver, refer to the section entitled Compaq ATAPI/IDE Controller. Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers (N100NT.SYS) Added support for Compaq Fast Ethernet NIC NC3120. For more information on this controller, refer to the section entitled Compaq Ethernet or Fast Ethernet Network Interface Controllers. Compaq Netelligent/NetFlex-3 Controller(NETFLX3.SYS) Updated the Compaq Netelligent/NetFlex-3 Controller driver from Version 4.25 to 4.26 to support the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 1S-256. Compaq System Management Driver(SYSMGMT.SYS) Updated the Compaq System Management driver version from 3.03.01 to 3.06.01. Added support for the following new Compaq servers and workstation: Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K Model 1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, Compaq ProLiant 7000 400-1024K Model 1S-256, and Compaq Professional Workstation AP200. Added support for logging Non-Maskable Interrupt (NMI) and Windows NT bugcheck data to the Windows NT Event Viewer. Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the system would not shut down after the processor fan failed if thermal shutdowns were disabled. This setting can be viewed and set through the Compaq System Configuration Utility as Compaq Automatic Server Recovery (ASR): Thermal shutdown and through the Compaq Insight Manager as Recovery: Environment: Degraded action. Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the thermal shutdown setting described above would be set to disabled after a thermal shutdown began. A thermal shutdown is performed after a fan failure or an over-temperature condition. For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT WKST.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: WKST.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.