SOFTPAQ NUMBER:  SP7471
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 3.51
        (Workstations)
VERSION:  1.31 Rev a
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Workstations

PRODUCTS AFFECTED:  Compaq Professional Workstation AP400, 5000, 5100, 6000,
                    and 8000

OPERATING SYSTEM:  Microsoft Windows NT 3.51

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  30 JUNE 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.x

SUPERSEDES:  SP6944

DESCRIPTION:  This SoftPaq creates two files -- a description file and a
self-extracting executable file.  The self-extracting executable file 
contains Compaq Support Software for Microsoft Windows NT 3.51
that supports the following subsystems and features of 
Compaq Professional Workstations:
 
   Adaptec AIC-78xx PCI SCSI Controller
   Compaq Ethernet or Fast Ethernet Network Interface Controllers
        Compaq Fast Ethernet Embedded NIC NC3121
        Compaq Fast Ethernet NIC NC3120
        Compaq Fast Ethernet NIC NC3121
   Compaq 4/8-GB SLR Tape Driver 
   Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor)
   Compaq Integrated Management Display Utility
   Compaq Netelligent Family of Controllers
   	Compaq Netelligent 10 T/2 PCI UTP/Coax Controller
    	Compaq Netelligent 10 T ISA UTP Controller	
    	Compaq Netelligent 10 T/2 ISA UTP/Coax Controller
    	Compaq Netelligent 10 T PCI UTP Controller
    	Compaq Netelligent 10/100 TX PCI UTP Controller
    	Compaq Netelligent Dual 10/100 TX PCI UTP Controller	
   Compaq NetFlex-3 Network Adapter Family
    	Compaq NetFlex-3/P Controller	
    	Compaq NetFlex-3/E Controller	
   Compaq NetFlex-3 network adapter monitoring, configuration and duplex 
        utility   
   Compaq SCSI Controllers
	Compaq Dual Channel Wide-Ultra SCSI-3 Controller	
        Compaq Wide-Ultra SCSI-3 Controller
        Compaq 32-Bit Fast-Wide SCSI-2/E Controller
      	Compaq 32-Bit Fast-SCSI-2 Controller
    	Integrated 32-Bit Fast-SCSI-2/P Controller	
    	Integrated 32-Bit Fast-Wide SCSI-2/P Controller
    	Integrated Wide-Ultra SCSI Controller
    	Compaq 32-Bit Fast-SCSI-2 Controller option board	
    	Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board
	Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board    	
	Compaq Wide-Ultra SCSI-3 Controller option board      
   Compaq SMART/SMART-2 Family of Array Controllers
	Compaq SMART/IDA-2/IDA/IAES Controllers
	Compaq SMART-2/P and Compaq SMART-2/E Controllers
	Compaq SMART-2DH Controller
	Compaq SMART-2SL Controller 
        Compaq SMART 3100ES Controller  
   Compaq Support Software Installation Utility
   Compaq System Management/Health Driver
   Diamond Multimedia Fire GL 4000 Graphics
   ELSA GLoria-L/GLoria-XL 3D Graphics Controller
   ELSA GLoria-Synergy/Synergy+ 3D Graphics Controller
   ESS AudioDrive Audio Controller
   Matrox MGA Millennium/Millennium II Graphics Controller
   STB Systems MVP Workstation Graphics Controller
   STB Systems MVP Pro 128 Graphics Controller

Enhancements/Fixes:

The release of the Compaq Support Software for Microsoft Windows
NT 3.51, Version 1.31 A, primarily supports the Compaq ATAPI/IDE 
Controller.

Compaq ATAPI/IDE Controller
·	Added support for the new Compaq ATAPI/IDE Controller 
	driver Version 2.21.1, which is only supported on the 
	Compaq Professional Workstation AP200.  For more 
	information about this driver, refer to the section 
	entitled Compaq ATAPI/IDE Controller.

Compaq Support Software Setup for Microsoft Windows NT
·	Added a message prompting the user to reboot after 
	installing the ELSA GLoria-Synergy + 3D Graphics 
	Controller driver because the Compaq Support Software 
	Setup for Microsoft Windows NT Configure button will 
	not work for this component until the system has been 
	rebooted.

Compaq System Management Driver
·	Updated the Compaq System Management driver version from 
	3.06.01 to 3.09.01.


For details, refer to NTREADME.HLP in the created support files.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       WKST.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       WKST.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1998, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.