SOFTPAQ NUMBER: SP7056 PART NUMBER: 277068-292, 277069-292, 277070-292, 277071-292 277072-292, 277073-292, 277074-292, 277075-292 FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 4.0 VERSION: 2.07 Rev B LANGUAGE: Japanese CATEGORY: Drivers DIVISIONS: Systems Workstations PRODUCTS AFFECTED: All Systems Products and Professional Workstations OPERATING SYSTEM: Microsoft Windows NT Version 4.0 (Japanese) SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: May 22, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: SP6251 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. It creates the Compaq Support Software for Microsoft Windows NT 4.0 diskettes. There are a total of eight diskettes with this release. The SSD supports the following subsystems and features of Compaq Systems products and Professional Workstations: Compaq Cluster Verification Utility Compaq Fibre Channel Storage System Compaq Fibre Channel Filter Driver Compaq Integrated Management Display Utility Compaq Integrated Management Log Viewer Compaq Online Storage Controller Recovery Utility Compaq PCI Hot Plug Utility Compaq Power Down Manager Compaq Power Supply Viewer Compaq ProLiant Storage System Compaq Recovery Server, Standby Agent with SMART-2 Support Compaq Recovery Server, Online Agent with SMART-2 Support Compaq Remote Insight Board Driver Compaq Remote Insight Board WAN Driver Compaq Remote Monitor Service Compaq Support Software Installation Utility Compaq System Management/Health Driver Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq 10/100 TX Embedded Intel WOL UTP Controller Compaq 10/100 TX PCI Intel UTP Controller SMART Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Diamond Multimedia Fire GL 4000 Graphics Controller ELSA Gloria-L 3D Graphics Controller ELSA Gloria-Synergy 3D Graphics Controller ELSA Gloria-Synergy+ 3D Graphics Controller ELSA Gloria-XL 3D Graphics Controller ESS AudioDrive Audio Controller Matrox Millennium/Millennium II Graphics Controller 3MODE Floppy Driver The following diskettes can be created JPing the files that result when the SoftPaq is unbundled: Disk 1 - Compaq Support Software for Microsoft NT 4.0 Disk #1 Disk 2 - Compaq Support Software for Microsoft NT 4.0 Disk #2 Disk 3 - Diamond Multimedia Fire GL 4000 Video Accelerator, Matrox MGA Millennium Video Drivers, and ESS 1868 Audio Drivers for Microsoft Windows NT 4.0 Disk 4 - ELSA Gloria-L Video Drivers Display Controller for Microsoft Windows NT 4.0 Disk 5 - Compaq Support Software for Microsoft NT 4.0 Utilities Disk Disk 6 - ELSA GLoria-Synergy/Synergy II Video Drivers for Microsoft NT 4.0 Disk 7 - ELSA GLoria-XL Video Drivers for Microsoft NT 4.0 Disk 8 - Compaq Ethernet or Fast Ethernet NIC Drivers for Microsoft NT 4.0 Enhancements/Fixes: The release of the Compaq Support Software for Microsoft Windows NT 4.0, Version 2.07 Revision B, primarily supports the new Compaq Cluster Verification Utility, the updated Compaq Fibre Channel Filter Driver, and the updated Compaq Fibre Channel Host Controllers SCSI Miniport Driver. Compaq Cluster Verification Utility (CCVU.EXE) Added the new Compaq Cluster Verification Utility (CCVU), which aids administrators in diagnosing their setup to determine if it is suitable for use with Microsoft Cluster Server. NOTE: There are known issues with the Compaq Cluster Verification Utility (CCVU) not working properly with non-English versions of NTS/E 4.0. Please use CCVU with the English version of NTS/E 4.0 only. This issue will be resolved in a later revision of the SSD. Compaq Fibre Channel Filter Driver (CPQFCFTR.SYS) Updated the Compaq Fibre Channel Filter driver from version 1.00 to 1.01. This updated driver contains enhancements to support Microsoft Cluster Server. Compaq Fibre Channel Host Controllers SCSI Miniport Driver (CPQFCALM.SYS) Updated the Compaq Fibre Channel Host Controllers SCSI Miniport driver from version 1.00 to 1.01. Added enhancements to support Microsoft Cluster Server. Fixed a problem with an adapter check, which intermittently occurred when the power was turned off if a controller was installed in a PCI hot-plug slot. Changed the behavior of the driver when a controller in a PCI hot-plug slot fails or has power removed. Previous versions of the driver may cause the I/O subsystem to hang if an I/O to a controller was stalled for too long. The following instances describe the modified behavior: 1) If a controller fails, the driver will return errors for any active I/Os as well as any new I/Os that are sent to the controller. The driver will continue to return errors for the failed controller until it is replaced. 2) If power is turned off to a controller that has not failed, then the driver will stall the I/O to the controller for approximately 60 seconds. If power is not restored to the slot within 60 seconds, the driver will switch to returning errors. Once power to the slot is restored, then the driver will continue normal operation for the controller. For details, refer to NTREADME.HLP located on diskette #1 HOW TO USE: 1. Obtain eight (8) formatted 1.44 MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. For installation instructions, run README on the 1st created diskette. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.