SOFTPAQ NUMBER: SP6944 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 3.51 (Workstations) VERSION: 1.30 Rev a LANGUAGE: English CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation AP400, 5000, 5100, 6000, and 8000 OPERATING SYSTEM: Microsoft Windows NT 3.51 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 28 MAY 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP5964 DESCRIPTION: This SoftPaq creates two files -- a description file and a self-extracting executable file. The self-extracting executable file contains Compaq Support Software for Microsoft Windows NT 3.51 that supports the following subsystems and features of Compaq Professional Workstations: Adaptec AIC-78xx PCI SCSI Controller Compaq Ethernet or Fast Ethernet Network Interface Controllers Compaq Fast Ethernet Embedded NIC NC3121 Compaq Fast Ethernet NIC NC3120 Compaq Fast Ethernet NIC NC3121 Compaq 4/8-GB SLR Tape Driver Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor) Compaq Integrated Management Display Utility Compaq Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller Compaq NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller Compaq NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Compaq SMART/SMART-2 Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq SMART 3100ES Controller Compaq Support Software Installation Utility Compaq System Management/Health Driver Diamond Multimedia Fire GL 4000 Graphics ELSA GLoria-L/GLoria-XL 3D Graphics Controller ELSA GLoria-Synergy/Synergy+ 3D Graphics Controller ESS AudioDrive Audio Controller Matrox MGA Millennium/Millennium II Graphics Controller STB Systems MVP Workstation Graphics Controller STB Systems MVP Pro 128 Graphics Controller Enhancements/Fixes: The release of the Compaq Support Software for Microsoft Windows NT 3.51, Version 1.30 A, primarily supports the following new products: the Compaq Professional Workstation AP400, the Compaq Professional Workstation AP200, the Compaq ProLiant 1850R, the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 1S-256. Adaptec AIC-78xx PCI SCSI Controller · Added support for the new Adaptec AIC-78xx PCI SCSI Controller driver, which is only supported on the Compaq Professional Workstation AP200. For more information on this driver, refer to the section in NTREADME.HLP entitled "Adaptec AIC-78xx PCI SCSI Controller." ATI RAGE IIC Graphics Controller · Added support for the new ATI RAGE IIC Graphics Controller driver. The Compaq Professional Workstations and/or Compaq Servers that may use this driver are indicated in the section in NTREADME.HLP entitled "Video Support for Compaq Professional Workstations and Compaq Servers." Compaq 4/8-GB SLR Tape Driver · Added support for the new Compaq 4/8-GB SLR Tape driver that supports the Compaq 4/8-GB SLR Tape Drive. This driver is an OEM driver from Tandberg Data Inc. For more information about this new driver, refer to the section in NTREADME.HLP entitled "Compaq 4/8-GB SLR Tape Driver Support." Compaq Netelligent/NetFlex-3 Controller · Updated the Compaq Netelligent/NetFlex-3 Controller driver version from 3.24 to 3.26 to support the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 1S-256. Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers · Added support for the new Compaq Ethernet or Fast Ethernet Network Interface Controller drivers. For more information on these controllers, refer to the section in NTREADME.HLP entitled "Compaq Ethernet or Fast Ethernet Network Interface Controllers." Compaq System Management Driver · Updated the Compaq System Management driver version from 3.00.01 to 3.06.01. · Added support for the following new Compaq servers and workstations: Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K Model 1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, Compaq ProLiant 7000 400-1024K Model 1S-256, Compaq Professional Workstation AP200, and Compaq Professional Workstation AP400. · Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the system would not shut down after the processor fan failed if thermal shutdowns were disabled. This setting can be viewed and set through the Compaq System Configuration Utility as Compaq Automatic Server Recovery (ASR): Thermal shutdown and through the Compaq Insight Manager as Recovery: Environment: Degraded action. · Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the thermal shutdown setting described above would be set to disabled after a thermal shutdown began. A thermal shutdown is performed after a fan failure or an over-temperature condition. Diamond Multimedia Fire GL 4000 Graphics Controller · Updated the Diamond Multimedia Fire GL 4000 Graphics Controller driver from version 2, 1, 0, 6 to 2, 1, 0, 29. This updated driver corrects a Softimage problem of the background picture disappearing when zooming into the scene and an ICEM-Surf problem of lower performance when moving the cursor into the window. ELSA GLoria-Synergy + 3D Graphics Controller · Added support for the new ELSA GLoria-Synergy + 3D Graphics Controller's video display driver version 4.32.00.248 for Windows NT 3.51. This new driver supports both the Synergy PCI and the new Permedia 2A (P2A/P2V) AGP adapter found on the new Compaq Professional Workstation AP400. STB Systems MVP PRO 128 Graphics Controller · Added new support for the STB Systems MVP PRO 128 Graphics Controller driver. The Compaq Professional Workstations that may use this driver are indicated in the section in NTREADME.HLP entitled "Video Support for Compaq Professional Workstations and Compaq Servers." For details, refer to NTREADME.HLP in the created support files. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT WKST.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: WKST.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.