SOFTPAQ NUMBER: SP6763 PART NUMBER: 277068-003 FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 4.0 VERSION: 2.08 Rev a LANGUAGE: English CATEGORY: Drivers DIVISIONS: Systems Workstations PRODUCTS AFFECTED: All Systems Products and Professional Workstations OPERATING SYSTEM: Microsoft Windows NT Version 4.0 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: 30 JUNE 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.0 SUPERSEDES: SP6750 DESCRIPTION: This SoftPaq creates the Compaq Support Software (SSD) for the Microsoft Windows NT 4.0 diskettes. There are a total of nine diskettes with this release. The SSD supports the following subsystems and features of Compaq Systems products and Professional Workstations: Compaq Cluster Verification Utility Compaq Fibre Channel Storage System Compaq Fibre Channel Filter Driver Compaq Integrated Management Display Utility Compaq Integrated Management Log Viewer Compaq Online Storage Controller Recovery Utility Compaq PCI Hot Plug Utility Compaq Power Down Manager Compaq Power Supply Viewer Compaq ProLiant Storage System Compaq Recovery Server, Standby Agent with SMART-2 Support Compaq Recovery Server, Online Agent with SMART-2 Support Compaq Remote Insight Board Driver Compaq Remote Insight Board WAN Driver Compaq Remote Monitor Service Compaq Support Software Installation Utility Compaq System Management/Health Driver Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq 10/100 TX Embedded Intel WOL UTP Controller Compaq 10/100 TX PCI Intel UTP Controller SMART Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller Compaq SCSI Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Compaq 32-Bit Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Compaq 32-Bit Fast-SCSI-2 Controller option board Compaq 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board Diamond Multimedia Fire GL 4000 Graphics Controller ELSA Gloria-L 3D Graphics Controller ELSA Gloria-Synergy 3D Graphics Controller ELSA Gloria-Synergy+ 3D Graphics Controller ELSA Gloria-XL 3D Graphics Controller ESS AudioDrive Audio Controller Matrox Millennium/Millennium II Graphics Controller STB Systems MVP Workstation Graphics Controller STB Systems MVP Pro 128 Graphics Controller ATI RAGE IIC Graphics Controller The following diskettes can be created using the files that result when the SoftPaq is unbundled: Disk 1 - Compaq Support Software for Microsoft NT 4.0 Disk #1 Disk 2 - Compaq Support Software for Microsoft NT 4.0 Disk #2 Disk 3 - Diamond Multimedia Fire GL 4000 Video Accelerator, Matrox MGA Millennium Video Drivers, and ESS 1868 Audio Drivers for Microsoft Windows NT 4.0 Disk 4 - ELSA Gloria-L Video Drivers and STB Systems MVD Workstation Display Controller for Microsoft Windows NT 4.0 Disk 5 - Compaq Support Software for Microsoft NT 4.0 Utilities Disk Disk 6 - ELSA GLoria-Synergy/Synergy II Video Drivers for Microsoft NT 4.0 Disk 7 - ELSA GLoria-XL Video Drivers for Microsoft NT 4.0 Disk 8 - Compaq Ethernet or Fast Ethernet NIC Drivers for Microsoft NT 4.0 Disk 9 - STB Systems MVP Pro 128 Video Drivers for Microsoft NT 4.0 Enhancements/Fixes: The release of the Compaq Support Software for Microsoft Windows NT 4.0, Version 2.08 Revision A, primarily supports the following new products: the Compaq ProLiant 1850R, the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, the Compaq ProLiant 7000 400-1024K Model 1S-256, and the Compaq Professional Workstation AP200. Adaptec AIC-78xx PCI SCSI Controller(AIC78XX.SYS) · Added support for the new Adaptec AIC-78xx PCI SCSI Controller driver, which is only supported on the Compaq Professional Workstation AP200. For more information on this driver, refer to the section entitled Adaptec AIC-78xx PCI SCSI Controller. ATI RAGE IIC Graphics Controller(ATI.SYS) · Added support for the new ATI RAGE IIC Graphics Controller driver. The Compaq Professional Workstations and/or Compaq Servers that may use this driver are indicated in the section entitled Video Support for Compaq Professional Workstations and Compaq Servers. Compaq Array Configuration Utility(CPQACU.EXE) · Added support for the Compaq Array Configuration Utility version 2.00, which is supported only in Windows NT 4.0. Previous versions of this utility are not supported in this release. For more information about the new features and restrictions of this utility, refer to the section entitled Compaq Array Configuration Utility Support. Compaq ATAPI/IDE Controller(CPQATAPI.SYS) · Added support for the new Compaq ATAPI/IDE Controller driver version 2.21.1, which is only supported on the Compaq Professional Workstation AP200. For more information about this driver, refer to the section entitled Compaq ATAPI/IDE Controller. Compaq Ethernet or Fast Ethernet Network Interface Controller Drivers (N100NT.SYS) · Added support for Compaq Fast Ethernet NIC NC3120. For more information on this controller, refer to the section entitled Compaq Ethernet or Fast Ethernet Network Interface Controllers. Compaq Netelligent/NetFlex-3 Controller(NETFLX3.SYS) · Updated the Compaq Netelligent/NetFlex-3 Controller driver from Version 4.25 to 4.26 to support the Compaq ProLiant 6000 400-512K Model 1-128, the Compaq ProLiant 6000 400-1024K Model 2S-256, and the Compaq ProLiant 7000 400-1024K Model 1S-256. Compaq Remote Insight Board/PCI(CPQRIB.SYS) · Added support for the new Compaq Remote Insight Board/PCI driver version 1.5. This driver supports both the Compaq Remote Insight Board/PCI and the Compaq Remote Insight Board. For more information about this driver, refer to the section entitled Compaq Remote Insight Board/PCI. Compaq SMART/SMART-2 Array Controller(CPQARRAY.SYS) · Added support for the Compaq SMART Array 3100ES Controller. The Compaq SMART Array 3100ES Controller is a four-channel Wide-Ultra SCSI-3 Drive Array Controller with 32-bit PCI system interface and I2O support for high-end servers. · Corrected a problem with the Compaq Online Storage Controller Recovery Utility incorrectly indicating a cable check status on one of the Compaq SMART-2 Array Controllers configured as part of a dual channel controller pair. Compaq System Management Driver(SYSMGMT.SYS) · Updated the Compaq System Management driver version from 3.03.01 to 3.06.01. · Added support for the following new Compaq servers and workstation: Compaq ProLiant 1850R, Compaq ProLiant 6000 400-512K Model 1-128, Compaq ProLiant 6000 400-1024K Model 2S-256, Compaq ProLiant 7000 400-1024K Model 1S-256, and Compaq Professional Workstation AP200. · Added support for logging Non-Maskable Interrupt (NMI) and Windows NT bugcheck data to the Windows NT Event Viewer. · Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the system would not shut down after the processor fan failed if thermal shutdowns were disabled. This setting can be viewed and set through the Compaq System Configuration Utility as Compaq Automatic Server Recovery (ASR): Thermal shutdown and through the Compaq Insight Manager as Recovery: Environment: Degraded action. · Corrected a problem on the Compaq ProLiant 800 and the Compaq ProLiant 1600 in which the thermal shutdown setting described above would be set to disabled after a thermal shutdown began. A thermal shutdown is performed after a fan failure or an over-temperature condition. For details, refer to NTREADME.HLP located on diskette #1 HOW TO USE: 1. Obtain nine formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP6763.EXE. 3. From that drive and directory, execute the downloaded SoftPaq file: SP6763 [ENTER] and follow the on-screen instructions. The following files will be created: QRST5.EXE 277068US._01 277068US._02 277068US._03 277068US._04 277068US._05 277068US._06 277068US._07 277068US._08 277068US._09 277068US.DOC 4. Please read 277068US.DOC for instructions on using QRST5 to create the diskettes and for the steps to install the software. 5. After the disks are created, you may delete the downloaded file SP6763.EXE and the other files it created from your hard drive if you wish. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies