SOFTPAQ NUMBER:  SP6584
PART NUMBER: N/A
FILE NAME: N/A 
TITLE:  Armada Specific Models Insight Management Agents for Windows 95 and NT 4.0 
VERSION:  3.50 Rev B
LANGUAGE:  Norwegian

CATEGORY:  Drivers

DIVISIONS:  Portables

PRODUCTS AFFECTED:  Armada 7800 6266/T/5000/D/M/1
		    Armada 7800 6266/T/5000/D/0/1
		    Armada 7800 6266/T/5000/D/0/3
		    Armada 7800 6266/T/8000/D/M/1
		    Armada 7800 6266/T/8000/D/0/1
		    Armada 7800 6266/T/8000/D/0/3
		   Compaq Armada SB 5233/S/2100/D/0/1
		   Compaq Armada SB 5233/S/3200/D/M/2
		   Compaq Armada SB 6233/T/3200/D/0/1
		   Compaq Armada SB 6233/T/3200/D/M/2
		   Compaq Armada 1700 6266/T/4000/D/M/1
		   Compaq Armada 1700 6266/T/4000/D/0/1
		   Compaq Armada 1700 6233/T/4000/D/M/1
		   Compaq Armada 1700 6233/T/4000/D/M/2
		   Compaq Armada 1700 6233/T/4000/D/0/1
		   Compaq Armada 1700 6233/T/4000/D/0/2

OPERATING SYSTEM:  Microsoft Windows 95
                   Microsoft Windows NT 4.0

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  30 Mar 1998

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  3.x

SUPERSEDES:  N/A

DESCRIPTION:  Unpacks the files needed to install the Insight Management
Agents for Windows 95 and NT 4.0 for the models listed above in PRODUCTS
AFFECTED.  Optionally creates two installation diskettes.

This software is the initial release for the models listed above.  It is not an update.  
It is offered here as a convenience to customers who may need to restore the software 
to their computer for any reason.  

Enhancements/Fixes:  N/A  
 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

To create the 2 optional installation diskettes, run MAKEDISK.BAT and 
follow on-screen instructions.

3. After the directory has been created, you may delete the  
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\setup
   where <path> is the drive and directory created in step 2
                      - or -
                   a diskette drive letter if using the optional 
                   installation diskettes 

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies