SOFTPAQ NUMBER: SP6528 PART NUMBER: N/A FILE NAME: N/A TITLE: Presario 2240, 2244ES, 2246, 2248 System ROM Upgrade VERSION: 6.0.8 (5/8/98) LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Consumer PRODUCTS AFFECTED: ONLY Compaq Presario Models 2240, 2244ES, 2246, 2248 CAUTION: Applying this ROM upgrade to other models may render your computer useless. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: May 8, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.01 SUPERSEDES: N/A DESCRIPTION: Creates a bootable ROM upgrade diskette that can be used to upgrade the System ROM to the 5/8/98 version in ONLY the Presario models specifically mentioned in the PRODUCTS AFFECTED section above. Enhancements/Fixes: - Modem detection after waking up from sleep or reboot was improved. - Prevented "Sleep" button from being acknowledged during Power up. - Corrected issue of loss of F10 Setup customizations when unit was powered off while unit was in "Sleep" mode. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette in a drive to create the diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. From Windows 95, shut down the computer. 6. Turn off the computer. Insert the created ROM upgrade diskette in drive A: and turn on the computer, allowing the system to boot from the diskette. The ROM upgrade procedure starts automatically. IMPORTANT: DO NOT TURN OFF THE COMPUTER DURING THE UPGRADE PROCESS! Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.