SOFTPAQ NUMBER: SP6156 PART NUMBER: FILE NAME: NWCMA422.ZIP TITLE: Compaq Insight Management Agents for NetWare VERSION: 4.22 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Systems PRODUCTS AFFECTED: Compaq Servers and Options running under Novell NetWare OPERATING SYSTEM: Novell NetWare 3.12 Novell NetWare 3.2 Novell NetWare 4.x and intraNetWare Novell Netware 5 SYSTEM CONFIGURATION: PREREQUISITES: This requires the Compaq NSSD drivers to be installed. EFFECTIVE DATE: March 29,1999 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP6133 DESCRIPTION: This SoftPaq contains the version 4.22 image of the Insight Management Agents for NetWare. Enhancements/Fixes: This supports the latest Compaq hardware. The file WHATSNEW.RDM contains more detailed information on Enhancements/Fixes. That file is contained inside the SoftPaq deliverable. Instructions on how to use this SoftPAQ to install Agents onto a server ----------------------------------------------------------------------- This file contains the instructions on how to install the Compaq Insight Management Agents for NetWare onto a NetWare server. The SoftPAQ process has left a self-extracting executable file (SP6156.exe)and this file (Sp6156.txt) in a subdirectory. The goal will be for the user to run the self-extracting executable on a client machine and install to any target server(s) which require the updated agents. The target server will temporarily contain a subdirectory which will be used to house the files used by the Compaq Insight Management Agent Installation NLM (CPQAGIN.NLM). The agent installation NLM will be run and will copy the files to the proper places and will configure the agents. The final step will be to delete the temporary subdirectory on the target server. The following steps provide more detailed information. Step 1: Run the INSTALL batch file to copy files to the Target Server. Copy this SP6156.TXT and the SP6156.EXE files to a client machine which has access to the network which contains the target NetWare server and then map a drive to the server. Then run the SP6156.EXE file on that client machine so it installs the necessary files onto the client machine. Finally, from the client machine, run the INSTALL.BAT file from the command prompt specifying the drive letter of the target server. For example, type INSTALL M: and hit the Enter key (where M: is the target server drive) Step 2: Run the installation NLM (CPQAGIN.NLM) on the target server. Walk over to the target server and run the Compaq Insight Management Agent Installation NLM in order to install and configure the new Agents. To do this, type: LOAD SYS:\AGENTS\NETWARE\ENG\COMPAQ\CPQAGIN and hit Enter. Next select the option to 'Copy New NetWare Agents to SYS:SYSTEM". This will copy the files from the temporary subdirectory to the proper locations. Once the file copies are complete, follow the instructions to configure the agents. Once the installation steps are complete, CPQAGIN will automatically start the agents. More detailed information can be found in the \AGENTS\NETWARE\ENG\CPQ_AGNT.RDM file residing on the target server. Step 3: Verify that the Agents work. Use Compaq Insight Manager to verify that the target server can be seen and that the agents are providing data. Step 4: Delete the temporary subdirectory on the target server. If desired, the temporary directory on the target server which was used to stage the files can be deleted. Go to a client machine and delete the \AGENTS folder from the target server. Copyright 1999, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies