SOFTPAQ NUMBER: SP6089 PART NUMBER: 388396-001 FILE NAME: N/A TITLE: Compaq Fibre Channel Backup Diagnostics for Windows NT VERSION: 2.02 Rev H LANGUAGE: US English CATEGORY: Diagnostics DIVISIONS: Systems PRODUCTS AFFECTED: Compaq StorageWorks Enterprise Backup Solution on the following products: Compaq ProLiant 6500, ProLiant 6000/7000, ProLiant 5500/3000, Compaq ProLiant 5000, ProLiant 1600/1200, ProLiant 2500, Compaq ProLiant 1500, ProLiant 850, ProLiant 800 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: October 23, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: N/A DESCRIPTION: Unpacks files needed to install Compaq Fibre Channel Backup Diagnostics for Windows NT. This is a subset of the normal Compaq Windows NT Diagnostics specifically to help identify any potential problems with the Fibre Channel Tape Controller and the DLT 15 Cartridge Library Model 3570 on the Fibre Channel Arbitrated Loop. It can also be used to upgrade firmware for these devices. Note: this is an interim solution which supports only the Fibre Channel Tape Controller and the DLT 15 Cartridge Library Model 3570. The next release of the Compaq Windows NT Diagnostics will integrate this capability into the full set of diagnostics. It is important to realize this subset of the Compaq Windows NT Diagnostics can not coexist with normal Compaq Windows NT Diagnostics probably already installed. For the safest operation when switching between the two versions, be sure to uninstall the current version and install the desired version according to the procedures below. This ensures proper updating of the registry and other directories. Enhancements/Fixes: - Support for Compaq StorageWorks Enterprise Backup Solution HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory. All files are unpacked into this newly created directory. To create the two optional installation diskettes, run MAKEDISK.BAT and follow on-screen instructions. 3. To install Interactively: a) Remove any previous versions of Compaq Diagnostics for Windows NT and Compaq Fibre Channel Backup Diagnostics for Windows NT. - Select Start, Settings, Control Panel - Select Add/Remove Programs - Select Compaq Diagnostics for Windows NT and "Add/Remove" b) Install this version of Compaq Fibre Channel Backup Diagnostics for Windows NT - Insert diskette #1 into drive A: if installing from optional diskettes - Run A:\SETUP.EXE or \SETUP.EXE where is directory from step 2 - Select Next - Select Finish c) Restart the computer for the changes to be in effect To install non-interactively ("silently"): a) Go to the download directory from step 2 above, or copy the contents of all two (2) optional installation diskettes into a directory on the hard drive. b) Run SETUP.EXE -S from the directory in a) above. c) Restart the computer for the changes to be in effect. 4. After the installation is completed, you may delete the directory created in step 2 if you wish. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies