SOFTPAQ NUMBER: SP6059 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Insight Management Agents for SCO UnixWare 2 VERSION: 3.82 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Systems PRODUCTS AFFECTED: Compaq Servers running SCO UnixWare 2.1 OPERATING SYSTEM: SCO UnixWare 2.1.2 SCO UnixWare 2.1.3 SYSTEM CONFIGURATION: N/A PREREQUISITES: - Compaq Enhanced Feature Supplement (EFS) for SCO UnixWare 2.1, Version 2.22 - SCO UnixWare 2.1.2 also requires PTF3238b from SCO (Available from SCO at ftp://ftp.sco.com/UW21). EFFECTIVE DATE: October 12, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP7484 DESCRIPTION: Creates a diskette containing Compaq Insight Management agents for SCO UnixWare 2, Version 3.82. IMPORTANT: Before installing, remove earlier version Compaq Insight Management Agents for SCO UnixWare 2, as explained below. HOW TO USE: Steps 1-5 are performed under DOS, Microsoft Windows 3.1, Windows95 or Windows NT. Steps 6-10 are performed under SCO UnixWare 2.1.2 or 2.1.3. 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. Three files will be created: SP6059.TXT, CIM382._01 and QRST5.EXE. 4. Execute QRST5.EXE and you will be prompted to insert the formatted diskette in a drive to create the diskette containing Compaq Insight Management Agents for UnixWare 2. 5. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2 and the files upacked in step 3. 6. To install the Compaq Insight Management Agents for SCO UnixWare 2, log in as "root." 7. If the server already has CIM Agents installed, remove them using the following command: # pkgrm cim 8. Insert the newly created diskette into the SCO default diskette drive and execute the following command: # pkgadd -d diskette1 cim Follow the on-screen instructions. 9. Remove the diskette. 10. Restart the server to complete the installation. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies