SOFTPAQ NUMBER: SP6463 PART NUMBER: 275709-008 TITLE: ProSignia and SystemPro/XL Systems ROMPaq Firmware Upgrade Diskette VERSION: 3.17A LANGUAGE: English CATEGORY: \Systems\ROMPaqs PRODUCTS AFFECTED: Compaq ProSignia 300 Compaq ProSignia 500 Compaq ProSignia 200 OPERATING SYSTEM AND VERSION: N/A SYSTEM CONFIGURATION: N/A PREREQUISITE: N/A EFFECTIVE DATE: 1 April 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP5308 DESCRIPTION: ROM E15 ProSignia 300/500 (04/02/1998) ======================================== Fixed initialization problems with video cards installed om two-deep PCI-PCI bridges. ROM P01 - ProSignia 200 (03/11/1998) ======================================== Fixed problem where systems without IDE hard drives had long delay in POST. Fixed initialization problem with ISA Plug and Play modems that support ASR paging. ROM P05 - ProSignia 200 (03/11/1998) ======================================== Fixed problem where systems without IDE hard drives had long delay in POST. Fixed initialization problem with ISA Plug and Play modems that support ASR paging. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP6463.EXE. 3. From that drive and directory, execute the SoftPaq file: SP6463 [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create diskette. 4. After the diskette is created, you may delete the downloaded file SP6463.EXE if you wish. 5. Refer to README.TXT on the diskette for instructions on installing and using the software. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies