SOFTPAQ NUMBER: SP6307 PART NUMBER: PC-Diags part number and Setup part number: N/A FILE NAME: N/A TITLE: PC Diagnostics and Compaq Setup for Workstations. VERSION: PC Diagnostics Version 10.25 Rev. B Pass 1. and Compaq Setup for Workstations Version 1.11 Rev. A Pass 4 LANGUAGE: German CATEGORY: Software Solutions\Workstations PRODUCTS AFFECTED: Professional Workstation 5000, 5100, 6000 and 8000 OPERATING SYSTEM AND VERSION: N/A SYSTEM CONFIGURATION: N/A PREREQUISITE: N/A EFFECTIVE DATE: 03/06/1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP5773 DESCRIPTION: HOW TO USE: 1. Obtain three formatted 1.44 MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP6307.EXE. 3. From that drive and directory, execute the SoftPaq file: SP6307 [ENTER] You will be prompted to place three formatted 1.44 MB diskettes into a diskette drive to create diskette. IMPORTANT: Only a 1.44 MB diskettes can be used, other types of media cannot be substituted. 4. After the diskette is created, you may delete the downloaded file SP6307.EXE if you wish. 5. At this point, a PC Diagnostics diskette and two Compaq Setup for Workstations diskettes have been created. To create or upgrade the diagnostics partition, boot the PC Diagnostics diskette, select Manage Diagnostics Partition from the Compaq Utilities menu, then select either Create or Upgrade Diagnostic Partition. 6. To run TEST, INSPECT or SETUP from the Diagnostics Partition, create or upgrade the partition in step 5 above, then select the desired option from the Compaq Utilities menu. 7. To run TEST or INSPECT from diskette without upgrading the Diagnostic partition, boot the PC Diagnostics diskette then select either TEST or INSPECT from the Compaq Utilities menu. 8. To run SETUP from diskette without creating or upgrading the Diagnostic partition, boot the Compaq Setup for Workstations diskette number 1 then select Run Setup from the main menu.