SOFTPAQ NUMBER: SP6254 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 4.0 (Workstations) VERSION: 2.05 Rev A LANGUAGE: Japanese CATEGORY: Workstations/Drivers PRODUCTS AFFECTED: Compaq Professional Workstation 5000, 5100, 6000 and 8000 OPERATING SYSTEM: Microsoft Windows NT 4.0 (Japanese) SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 16 March 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: SP5896 DESCRIPTION: This SoftPaq is for Japanese products, and cannot be run in United States mode. This SoftPaq creates two files -- a description file and a self-extracting executable file. The self-extracting executable file contains Compaq Support Software for Microsoft Windows NT 4.0 that supports the following subsystems and features of Compaq Professional Workstations: System Management/Health driver Netelligent Family of Controllers Compaq Netelligent 10 T/2 PCI UTP/Coax Controller Compaq Netelligent 10 T ISA UTP Controller Compaq Netelligent 10 T/2 ISA UTP/Coax Controller Compaq Netelligent 10 T PCI UTP Controller Compaq Netelligent 10/100 TX PCI UTP Controller Compaq Netelligent Dual 10/100 TX PCI UTP Controller NetFlex-3 Network Adapter Family Compaq NetFlex-3/P Controller Compaq NetFlex-3/E Controller NetFlex-3 network adapter monitoring, configuration and duplex utility SMART Family of Array Controllers Compaq SMART/IDA-2/IDA/IAES Controllers Compaq SMART-2/P and Compaq SMART-2/E Controllers Compaq SMART-2DH Controller Compaq SMART-2SL Controller 32-Bit SCSI-2 Family of Controllers Compaq Dual Channel Wide-Ultra SCSI-3 Controller Compaq Wide-Ultra SCSI-3 Controller Compaq 32-Bit Fast-Wide SCSI-2/E Controller Fast-SCSI-2 Controller Integrated 32-Bit Fast-SCSI-2/P Controller Integrated 32-Bit Fast-Wide SCSI-2/P Controller Integrated Wide-Ultra SCSI Controller Fast-SCSI-2 Controller option board Integrated 32-Bit Fast-Wide SCSI-2/P Controller option board Compaq 32-Bit Fast-Wide SCSI-2/E Controller option board Compaq Wide-Ultra SCSI-3 Controller option board 32-Bit SCSI-2 Family of controllers Matrox Millennium/Millennium II video controller ELSA Gloria-L video controller ELSA Gloria-Synergy Video Controller ELSA Gloria-XL Video Controller Diamond Multimedia Fire GL 4000 Video Accelerator ESS AudioDrive audio controller Compaq Support Software Installation utility Enhancements/Fixes: For details, refer to NTREADME.HLP in the created support files. The release of the Compaq Support Software for Microsoft Windows NT 4.0, Version 2.05J Revision A, primarily supports the Compaq Fibre Channel Storage System Driver. Compaq NetFlex-3 Controller (NETFLX3.SYS) - Updated the Compaq NetFlex-3 driver to disable autonegotiation in the Physical Layer (PHY) when both speed and duplex are set, thus enhancing network connections. Compaq Remote Insight Board Driver (CPQRIB.SYS) - Updated the Compaq Remote Insight Board driver version number from 1.22 to 1.23. This updated driver includes a fix for a random problem that prevented all of the system events from being copied to the Compaq Remote Insight Board. Compaq Remote Insight Board WAN Driver (RIBWAN.SYS) - Modified the OEMSETUP.INF file to perform a check to determine if a Service Pack needs to be reapplied to the system after RAS is installed. This check is performed because the files taken from the original Microsoft Windows NT 4.0 media during RAS install may not be the same as the files previously applied on the system from the Service Pack media. Compaq Support Software for Microsoft Windows NT Setup (SETUP.EXE) - Modified the SETUP.EXE file to perform a check to determine if a Service Pack needs to be reapplied to the system after RAS is installed. This check is performed because the files taken from the original Microsoft Windows NT 4.0 media during RAS install may not be the same as the files previously applied on the system from the Service Pack media. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: README.TXT WKST.EXE 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. From the directory in which the files are created, execute the self-extracting executable: WKST.EXE [ENTER] 5. Follow the instructions on the screen to extract (unzip) the support software files to a folder on your hard drive and run the program SETUP.EXE to install the software. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.