SOFTPAQ NUMBER: SP6001 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq EFS 5.18 for SCO OpenServer Release 5 VERSION: 5.18 LANGUAGE: English CATEGORY: Systems/Drivers PRODUCTS AFFECTED: Compaq Servers running SCO OpenServer Release 5 OPERATING SYSTEM: SCO OpenServer Release 5.04 Enterprise SCO OpenServer Release 5.04 Host SCO OpenServer Release 5.02 Enterprise SCO OpenServer Release 5.02 Host SCO OpenServer Release 5.0 Enterprise SCO OpenServer Release 5.0 Host SCO Internet FastStart SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 01 January 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP4986 DESCRIPTION: Creates six diskettes containing the Compaq Extended Feature Supplement (EFS) 5.18 for SCO OpenServer Release 5. These six diskettes include: - EFS Disk 1 - EFS Disk 2 - Boot Time Loadable Drivers (BTLD) Diskette - Compaq N1 Boot Diskette for Releases 5.0 and 5.02 - SCO N1 Boot Diskette for Release 5.04 - Documentation Diskette This is a collection of device drivers to provide maximum performance with Compaq hardware. It also includes several utilities to monitor and increase the performance of your Compaq server. Changes From EFS 5.17 - ProSignia 200 - Compaq ProLiant Storage System /U - Compaq Hot Plug Redundant Power Supply - Compaq Dual Channel Wide-Ultra SCSI-3 Controller Device Drivers Included in EFS 5.18 - Compaq NetFlex Controller Support. - Compaq Netelligent Controller Support. - Compaq SCSI-2 Support. - Compaq 32-Bit Fast-SCSI-2 Controller Card. - Compaq 32-Bit Fast-Wide SCSI - 2/ E Controller Card. - Compaq 32-Bit Fast-Wide SCSI - 2/ P Controller Card. - Compaq Smart-2 /E Drive Array Support. - Compaq Smart-2 /P Drive Array Support. - Compaq Smart-2SL Drive Array Support - Compaq System Wellness Driver. - Compaq Intelligent Drive Array Support. - Boot-Time Loadable Drivers. Utilities Included in EFS 5.18 - SCSI-2 Management Utility. - Intelligent Drive Array (IDA) Diagnostic Utility. - Compaq System Monitor Utility. - Compaq Single Launch Point Utility. - Compaq Ultra Diagnostic Utility. HOW TO USE: 1. Obtain six (6) 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP6001.EXE 3. From that drive and directory, execute the SoftPaq file: SP6001 [ENTER] The following files should be created: QRST5.EXE EFS518._01 EFS518._02 EFS518._03 EFS518._04 EFS518._05 EFS518._06 README.TXT 4. After the files are created, you may delete the downloaded file SP6001.EXE if you wish. 5. Refer to README.TXT for instructions on creating the six (6) diskettes. Copyright 1989-1998, Compaq Computer Corporation. All rights reserved. Copyright 1991-1998, The Santa Cruz Operation, All rights reserved Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies