SOFTPAQ NUMBER: SP5779 PART NUMBER: N/A FILE NAME: DB011298.CAB TITLE: Professional Workstation 5100 System ROM Image for Remote ROM Flash VERSION: 686W4_011298 Rev A LANGUAGE: English CATEGORY: Workstation/ROMPaqs PRODUCTS AFFECTED: Compaq Professional Workstation 5100 OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 14 January 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x PREREQUISITE: Remote Management Setup SUPERSEDES: N/A DESCRIPTION: Creates a cabinet file that contains a binary image for the 01/12/98 System ROM in the Professional Workstation 5100. The CAB file is used by Remote Management Setup to flash the System ROM on target Workstations on a network. Enhancements/Fixes: - Adds 333-Mhz processor support with latest patch for multiple processors. - Extends MP tables for NT 5.0. - Adds Remote Security and Remote Flash capabilities. - Allows power LED to be enabled in F10 Setup to blink during Energy Save Mode. - Allows Infrared Port to be enabled in F10 Setup. - Adds support for ECC error reporting in latest health driver (NTSSD v2.04). - Fixes Plug-and-Play NIC cards that report RIPL errors. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. The name of the extracted file is DB011298.CAB. 3. After the CAB file has been created, you may delete the self-extracting file downloaded in step 1. 4. Refer to the Remote Management Setup documentation for instructions on creating a Remote ROM Flash job to flash the ROM on target Workstations on the network. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.