SOFTPAQ NUMBER: SP5982 PART NUMBER: N/A FILE NAME: TANDQIC.SYS TITLE: Compaq 4/8 GB SLR Tape Driver for Microsoft Windows NT 4.0 and 3.51 VERSION: 4.0 LANGUAGE: English CATEGORY: Servers/Drivers PRODUCTS AFFECTED: All Compaq Servers that support the Compaq 4/8 GB SLR Tape Drive OPERATING SYSTEM: Microsoft Windows NT 4.0 and 3.51 SYSTEM CONFIGURATION: System must have the Compaq 4/8 GB SLR Tape Drive Physically attached to a SCSI controller. EFFECTIVE DATE: 2 March 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.x SUPERSEDES: N/A DESCRIPTION: The Compaq 4/8 GB SLR Tape Driver supports the Compaq 4/8 GB SLR Tape Drive. This is an OEM driver from Tandberg Data Inc. The drive must be connected to any Compaq SCSI controller. This SoftPaq is designed to unpack files to hard drive, but work on diskette as well. It contains all file necessary to install this tape drive on a Compaq Server. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions to unpack the files. The number of files to be created and total file size is displayed. You will be given the chance to specify the target directory for the files, or default to the download directory. The following files will be created: DISK1 OEMSETUP.INF README.TXT TANDQIC.SYS Note: NT 3.51 Operating System users need to install Service Pack 5 or set the MS-DOS Console to Full Screen, before executing the downloaded file. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. Instructions for installation of the Compaq 4/8 GB SLR Tape Driver are contained in the README.TXT file. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.