SOFTPAQ NUMBER: SP5795 PART NUMBER: N/A FILE NAME: N/A TITLE: Deskpro ATI Rage Video Drivers for Windows 95/98 VERSION: 5.01 Rev B LANGUAGE: Dutch CATEGORY: Drivers DIVISIONS: Desktops PRODUCTS AFFECTED: Compaq Deskpro EN, Deskpro EP, and Deskpro SB models with one of the ATI Rage Graphics Controllers listed below NOTE: To determine if your model has one of these controllers -- In Windows 95/98, go to the Control Panel, then select the System icon, the Device Manager tab, and the Display adapters icon. OPERATING SYSTEM: Microsoft Windows 95 Microsoft Windows 98 SYSTEM CONFIGURATION: ATI Rage Pro Turbo 1x or 2x Graphics Controller ATI Rage IIC Graphics Controller PREREQUISITES: N/A EFFECTIVE DATE: 25 June 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install the Windows 95/98 video drivers for any of the ATI Rage Graphics Controllers listed above, which are used in certain models of the Deskpro EN, Deskpro EP, and Deskpro SB Series. Optionally allows two installation diskettes to be created. This is the initial version of this software. It is not an update. It is offered here as a convenience to customers who may need to restore the video driver to an affected computer for any reason. HOW TO USE: 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and files are unpacked into subdirectories named Disk_01 and Disk_02 that are created under the download directory or the directory specified. 3. After the folders Disk_01 and Disk_02 have been created, you may delete the self-exctracting file downloaded in step 1. 4. The drivers may be installed directly from the folders on the download directory, or two driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. To read detailed installation and usage instructions, refer to README.TXT. 5. To install a driver, run SETUP.EXE. For example, select Start, Run, then enter: \disk_01\disk1\setup where is the drive and directory chosen in step 2 Or, if installing from diskettes, enter: a:\setup Follow the on-screen instructions to complete the installation. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.