SOFTPAQ NUMBER: SP5767 PART NUMBER: 276749 FILE NAME: N/A TITLE: Deskpro Diamond Viper V330 Video Driver for Windows NT 4.0 VERSION: 4.00.1381.0228 Rev C LANGUAGE: English CATEGORY: Drivers DIVISIONS: Desktops PRODUCTS AFFECTED: Compaq Deskpro EP, Deskpro EN and Deskpro SB models with a Diamond Viper V330 Graphics Controller NOTE: To determine if your model has this controller -- In Windows NT, go to the Control Panel, then select Display, Settings, Display type. OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: Diamond Viper V330 Graphics Controller PREREQUISITES: N/A EFFECTIVE DATE: May 15, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install the Windows NT 4.0 video driver for the Diamond Viper V330 Graphics Controller used in certain models of the Deskpro EP, Deskpro EN and Deskpro SB Series (see NOTE above). Optionally allows an installation diskette to be created. This is the same version of this driver that was originally included in the affected models. It is not an upgrade. It is offered here as a convenience to customers who may need to restore it to their computer for any reason. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into a subdirectory named Disk_01 that is created under the download directory or the directory specified. 3. After the folder Disk_01 has been created, you may delete the self-extracting file downloaded in step 1. 4. The driver may be installed directly from the files on the download directory or driver diskette can be created. To create a driver diskette, run MAKEDISK.BAT. To install the driver, go to the Control Panel and select: Display/Settings/Display Type Verify that the Adapter Type is one of the ones listed above. If it is not, then cancel and exit. If it is, then continue to select: Change/Have Disk Type in the path to the download directory or select "Browse" to specify the location of the files extracted in step 2. 5. Select OK to install the driver. 6. After the driver has been installed, you may delete the files from the download directory if you wish. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies