SOFTPAQ NUMBER: SP5766 PART NUMBER: 27675 FILE NAME: N/A TITLE: Deskpro Diamond Viper V330 Video Driver for Windows 95/98 VERSION: 4.10.01.0024 Rev C LANGUAGE: English CATEGORY: Driver DIVISIONS: Desktops PRODUCTS AFFECTED: Compaq Deskpro EP, Deskpro EN and Deskpro SB models with a Diamond Viper V330 Graphics Controller NOTE: To determine if your model has this controller -- In Windows 95/98, go to the Control Panel, then select the System icon, the Device Manager tab, and the Display adapters icon. OPERATING SYSTEM: Microsoft Windows 95 Microsoft Windows 98 SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: June 25, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: N/A DESCRIPTION: Unpacks the files needed to install the Windows 95 video driver for the Diamond Viper V330 Graphics Controller used in certain models of the Deskpro EP, Deskpro EN and Deskpro SB Series (see NOTE above). Optionally allows three installation diskettes to be created. This is the same version of this driver that was originally included in the affected models. It is not an upgrade. It is offered here as a convenience to customers who may need to restore it to their computer for any reason. HOW TO USE: 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and files are unpacked into subdirectories named Disk_01, Disk_02, and Disk_03 that are created under the download directory or the directory specified. 3. After the folders disk_01, disk_02 and disk_03 have been created, you may delete the self-extracting file downloaded in step 1. 4. The driver may be installed directly from the folders on the download directory, or three driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. To read detailed installation and usage instructions, refer to README.TXT. 5. To install the driver, run INSTALL.EXE from directory disk_01. For example, select Start, Run, then enter: \disk_01\install where is the drive and directory chosen in step 2 or a diskette drive letter if installing from diskettes Follow the on-screen instructions to complete the installation. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.