SOFTPAQ NUMBER: SP5379 PART NUMBER: 275533-008, 275534-008, 276089-008 FILE NAME: N/A TITLE: Workstation GLoria-XL Drivers for Windows NT 4.0 VERSION: 5.26 Rev A LANGUAGE: English CATEGORY: Drivers DIVISIONS: Workstations PRODUCTS AFFECTED: Compaq Professional Workstation 5100, 6000, or 8000 using the GLoria-XL 3D Graphics Controller. NOTE: This graphics controllers is standard equipment on selected Workstation models only, but could be an option installed on other models. OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: GLoria-XL 3D Graphics Controller PREREQUISITES: N/A EFFECTIVE DATE: 19 Feb 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP5010 (for models with Gloria-XL only) DESCRIPTION: Creates the 3-diskette set, "Workstation GLoria-XL Drivers for Windows NT 4.0 ," for only those Professional Workstation models using a Gloria-XL 3D Graphics Controller. NOTE: Workstation models using a Gloria-L 3D Graphics Controller and running Windows NT 4.0 should continue to use driver version 5.24 Rev A, from SoftPaq SP5010. Enhancements/Fixes: - Corrects artifacts in 32K color mode that may occur in some applications, such as SoftImage. HOW TO USE: 1. Obtain 3 formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskettes in a drive to create the diskettes. 4. After the diskettes have been created, you may delete the SoftPaq file downloaded in step 2. 5. To Install, see section 3 in the file README.TXT on the first diskette. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies