SOFTPAQ NUMBER: SP5447 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq PC Card Support for Windows NT 4.0 VERSION: 2.10 Rev A LANGUAGE: French CATEGORY: Drivers DIVISIONS: Portables Consumer PRODUCTS AFFECTED: Compaq Armada 1500 Series Compaq Armada 4100 Series Compaq Armada 4200 Series Compaq Armada 7300 Series Compaq Armada 7700 Series Compaq LTE 5000 Series Compaq Presario 1710SB Compaq Armada 1570/1571/1572/1573/1598 Compaq Armada SB 5200/32/3.2/D Compaq Armada SB 5200/32/3.2/DM Compaq Armada SB 5233/32/4.0/DT Compaq Armada SB 5233/32/4.0/DMT OPERATING SYSTEM: Microsoft Windows NT 4.0 SYSTEM CONFIGURATION: - System Firmware Dependencies Compaq Armada 1500 Series -- 09/18/97 or later Compaq Armada 1570/1571/1572/1573/1598 -- 09/18/97 or later Compaq Armada SB 5200/32/3.2/D -- 09/18/97 or later Compaq Armada SB 5200/32/3.2/DM -- 09/18/97 or later Compaq Armada SB 5233/32/4.0/DT -- 09/18/97 or later Compaq Armada SB 5233/32/4.0/DMT -- 09/18/97 or later Compaq Armada 4100 Series -- 08/01/97 or later Compaq Armada 4200 Series -- 09/12/97 or later Compaq Armada 7300 Series -- 07/06/97 or later Compaq Armada 7700 Series -- 09/15/97 or later Compaq LTE 5000 Series -- Version 7.02 or later Compaq Presario 1710SB -- 09/18/97 or later - Software Dependencies Compaq LTE 5000 Series -- NT 4.0 Supplemental Programs Disk Version 1.10 Rev C or later All other supported products -- NT 4.0 Supplemental Programs Disk Version 2.10 Rev A (or later) or Power Conservation for NT 4.0 Version 2.20 Rev A EFFECTIVE DATE: 12 January 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP4902 DESCRIPTION: Unpacks files needed to install Compaq PC Card Support for Windows NT 4.0 for the specific Armada and Presario models mentioned above. Optionally creates three installation diskettes. ENHANCEMENTS: The following list includes the enhanced features supported in Version 2.10 Rev A that are beyond Version 2.08 Rev A. - Hot swapping Zoomed Video PC Cards - Hot swapping Multi-Function PC Cards - Hot swapping Combo PC Cards (only if LAN function is NOT loaded) - 5.0 and 3.3 volt PC Cards (not supported on Armada 4100 and LTE 5000 Series) - Cold, Warm, and Hot Docking with multiple (dis)similar controllers - CardBus PC Cards with device details listed above - Socket Power Management (Socket Off on-demand) - PnP Configuration Methodology HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" to confirm the unpacking of files creates a new directory folder in the download directory. All files are unpacked into this newly created directory. 3. After the directory has been created, you may delete the self-extracting file downloaded in step 1. 4. The application may be installed directly from the unpacked files, or three (3) diskettes can be created. To create the diskettes, run MAKEDISK.BAT. To install, first boot the system with no PC Cards in PCMCIA slots. Then run SETUP.EXE, as follows: Select Start on the Windows NT Task Bar, select Run, then enter: \setup where is the drive and directory from step 2 or a diskette drive letter if installing from diskette Follow the CardWare installation and setup prompts. 5. After the installation is completed, you may delete the files created in step 2. Copyright 1997, 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies