SOFTPAQ NUMBER: SP5332 PART NUMBER: N/A FILE NAME: N/A TITLE: LCM ROM Flash Tools for Deskpro 4000 and 6000 (686V ROM) VERSION: 686V_020498 LANGUAGE: English CATEGORY: Desktops/ROMPaqs PRODUCTS AFFECTED: Deskpro 4000 and 6000 models with a 686V Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: Intel LANDesk Configuration Manager EFFECTIVE DATE: March 06, 1998 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.X SUPERSEDES: SP4693 DESCRIPTION: Creates a set of utility files that can be used with Intel LANDesk Configuration Manager (LCM) to upgrade to the 02/04/98 version System ROM in the Deskpro 4000 and 6000 models with a 686V Family ROM. The ROM Family and ROM date can be determined by running F10 Setup. LANDesk Configuration Manager is a remote configuration and program loading tool for network PCs. NOTE: The standard ROMPaq will not run under LCM. Enhancements/Fixes in this version: - Added new Adaptec SCSI ROM that fixes cold boot problems seen in 333-MHz models using SCSI hard drives. - Added Net PC compliant (PXE) remote network boot support to enable Remote System Installation. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Entering "Y" confirms the unpacking of several files. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. Refer to the file ASSIGNPW.TXT for instructions about the use of the utility programs. Copyright 1998, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.