SOFTPAQ NUMBER: SP5248 PART NUMBER: N/A FILE NAME: N/A TITLE: Deskpro Windows 95 Drivers for Matrox Video VERSION: 3.75.17 Rev A LANGUAGE: English, French, German, Italian, and Spanish CATEGORY: Desktops/Driver PRODUCTS AFFECTED: Compaq Deskpro/ProLinea models with a Matrox Millennium, Performance, or Millennium II video controller including: Deskpro 2000 models: 5133, 6200 Deskpro 6000 models: 5166, 5200, 6180, 6200 Deskpro 5120, Deskpro 5133, Deskpro 5150, Deskpro 5166 Deskpro XL 5100, Deskpro XL 5120, Deskpro XL 5133, Deskpro XL 590, Deskpro XL 6150, Deskpro XL 6200 ProLinea 5133, ProLinea 5150, ProLinea 5166 NOTE: One of the Matrox video controllers could also be installed in other Deskpro models as an option. To determine if your desktop unit has a Matrox Millennium, Performance or Millennium II controller, click on the System icon in the Windows 95 Control Panel, the Device Manager tab, and the Display Adapters icon. OPERATING SYSTEM: Microsoft Windows 95 SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 24 November 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP4425 DESCRIPTION: Unpacks the files needed to install the Microsoft Windows 95 display driver for the Matrox Millenium, Performance, and Millennium II Controllers used in the above-mentioned Deskpro and ProLinea computers. Optionally creates two installation diskettes. The driver is translated into English, French, Italian, German, and Spanish. HOW TO USE: 1. Download the Softpaq to a directory on your hard drive. The file downloaded is a self-extracting executable with the file name based on the Softpaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into new folders that are created in the current directory. To create the folders in a different directory, specify the complete path of the directory as a parameter when executing the SoftPaq: SPXXXX Enter "Y" to confirm and folders are created in the download directory or the directory specified. 3. After the folders disk_01 and disk_02 have been created, you may delete the self-exctracting file downloaded in step 1. 4. The driver may be installed directly from the folders on the download directory, or two driver installation diskettes can be created. To create installation diskettes, run MAKEDISK.BAT. To read detailed installation and usage instructions, refer to README.TXT. 5. To install the driver, run SETUP.EXE from directory disk_01. For example, select Start, Run, then enter: \disk_01\setup where is the drive and directory chosen in step 2 or a diskette drive letter if installing from diskettes Follow the on-screen instructions to complete the installation. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.