SOFTPAQ NUMBER:  SP5037
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Support Software for Microsoft Windows NT 4.00 
        (Workstations)
VERSION:  2.03 Rev A
LANGUAGE:  English

CATEGORY:  Workstations/Drivers

PRODUCTS AFFECTED:  Compaq Professional Workstation 5000, 5100, 6000, and 8000

OPERATING SYSTEM:  Microsoft Windows NT 4.00

SYSTEM CONFIGURATION:  N/A

EFFECTIVE DATE:  17 November 1997

SUPERSEDES:  SP4345

DESCRIPTION:  This SoftPaq creates two files -- a description file and a
self-extracting executable file.  The self-extracting executable file 
contains Compaq Support Software for Microsoft Windows NT 4.00 
that supports the following subsystems and features of 
Compaq Professional Workstations:
 
   System Management/Health driver 
   NetFlex-3/Compaq Netelligent 10/100 TX Embedded UTP/Coax network adapter
   NetFlex-3/Compaq Netelligent 10/100 TX Embedded UTP/Coax network 
      adapter monitoring, configuration, and duplex utility 
   Compaq 10T PCI UTP and 10/100 TX PCI UTP 
   IDA/IDA-2 disk controller 
   SMART/SMART-2 array controller 
   32-Bit SCSI-2 Family of controllers 
   Millennium/Millennium II video controller 
   Gloria-L video controller 
   Multimedia Fire GL 4000 Video Accelerator 
   MVP Workstation Display Controller 
   ESS AudioDrive audio controller 
   Compaq Support Software diskette Installation utility 

Enhancements/Fixes:

For details, refer to NTREADME.HLP in the created support files.

This version primarily supports the Compaq Dual Channel Wide-Ultra 
SCSI-3 Controller.  It has been tested with and supports NT Server 
Enterprise Edition.

Compaq Dual Channel Wide-Ultra SCSI-3 Controller 

  This controller was designed primarily as a complimentary controller for 
  high end tape solutions, like Compaq’s DLT Tape Array II and DLT Libraries; 
  it provides support for the maximum number of devices possible while only 
  taking up a single PCI slot.  It delivers exceptional system performance 
  along with two separate SCSI-3 channels.

Compaq PCI Hot Plug (CPQPCI.EXE)

  Added support for multifunction devices such as the Compaq Dual Channel 
  Wide-Ultra SCSI-3 Controller.

Compaq Remote Monitor Service CPQRCMC.EXE)

  Added support for multifunction devices such as the Compaq Dual Channel 
  Wide-Ultra SCSI-3 Controller.

Compaq System Management Driver (SYSMGMT.SYS)

  Changed the policy for stopping at the F1 prompt for systems equipped with 
  the Integrated Management Log.  These systems will no longer stop at the F1 
  prompt on the next boot after the system encounters one or more critical errors.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change 
to that directory.  The file that is downloaded is a self-extracting
executable with a filename based on the SoftPaq Number above.

2. From that drive and directory, execute the downloaded file 
and follow the on-screen instructions to unpack the files.
The number of files to be created and total file size is displayed.
You will be given the chance to specify the target directory for 
the files, or default to the download directory.
The following files will be created:
       README.TXT
       WKST.EXE

3. After the files have been created, you may delete the  
self-extracting file downloaded in step 1.

4. From the directory in which the files are created, execute the 
self-extracting executable:
       WKST.EXE [ENTER]

5. Follow the instructions on the screen to extract (unzip) the support 
software files to a folder on your hard drive and run the program 
SETUP.EXE to install the software.

Copyright 1997, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.