SOFTPAQ NUMBER: SP4669 PART NUMBER: 270892-004 FILE NAME: N/A TITLE: ROMPaq for Deskpro 4000 and 6000 (686V ROM) VERSION: 686V_092897 LANGUAGE: English CATEGORY: Desktops/ROMPaqs PRODUCTS AFFECTED: Deskpro 4000 and 6000 models with a 686V Family ROM NOTE: Run F10 Setup to determine the ROM Family and ROM date. OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 04 November 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP4111 DESCRIPTION: This creates a ROMPaq firmware upgrade diskette to upgrade the System ROM to the 09/28/97 version for Deskpro 4000 and 6000 models with a 686V Family ROM. The ROM Family and ROM date can be determined by running F10 Setup. Enhancements/Fixes in this version: - Fixes a problem with video controllers, such as the Millennium II Graphics Controller, that use the Accelerated Graphics Port (AGP). These controllers were not always working properly with the CleanBoot screen option when combined with a Compaq P70 monitor. HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette in a drive to create the diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Keeping the newly created diskette in the A: drive, cycle system power to boot from the ROMPaq diskette. 6. Follow the on-screen instructions to select the 09/28/97 Compaq System ROM and upgrade the firmware. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies