SOFTPAQ NUMBER: SP4070 PART NUMBER: N/A FILE NAME: N/A TITLE: Deskpro/ProLinea Windows 95 Universal Video Driver Manager VERSION: 1.10.01 Rev B LANGUAGE: Finnish CATEGORY: Desktops/Drivers PRODUCTS AFFECTED: Deskpro 2000 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 5233MMX Deskpro 2000 6180, 6200, Deskpro 4000 5100, 5120, 5133, 5166, 5166MMX, 5200, 5200MMX, 5233MMX, Deskpro 4000 6180, 6200, Deskpro 4100, 450, 466, 575, 590 Deskpro 5100, 5120, 5133, 5150, 5166 Deskpro 6000 5166, 5200, 6180, 6200, Deskpro XL 450, 466, 5100, 5120, 5133, 560, 566, 575, 590, 6150, 6200 ProLinea 4100, 450, 466, 5100, 5100e, 5120, 5120e, 5133, 5150, 5166 ProLinea 575, 575e, 590 OPERATING SYSTEM: Microsoft Windows 95 SYSTEM CONFIGURATION: This Universal Video Driver Manager supports any of the following graphics controllers: Matrox Millennium Matrox Qvision 2000/2000+ (Drivers only, no Power Desk) S3 ViRGE S3 V2 Cirrus Logic 5434 Cirrus Logic 5436 Cirrus Logic 5446 Compaq QVision 1280P/1280P+ EFFECTIVE DATE: September 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP3868 DESCRIPTION: Unpacks the files needed to install a Windows 95 application program that detects the type of graphics controller in Deskpro and ProLinea computers and installs the appropriate Windows 95 video driver that supports it. New features for this version include: - Updated Deskpro 2000/4000 Windows/95 Driver Video drivers included in this SoftPaq: Deskpro 2000/4000 Windows 95 Graphics Drivers Ver 1.91(SoftPaq SP4053) Matrox Millennium, Ver 3.53.016 (SoftPaq SP3814) Matrox Qvision 2000/2000+. Ver 2.01 (Softpaq SP1493) HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into the download directory or the directory specified. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. The application may be installed directly from the files on the download directory or a set of diskettes can be created. To create a set of diskettes, run MAKEDISK.BAT. To start the application, select Start, Run. Then type the path to the download directory and the application name (SETUPUDM.EXE). Example: c:\\setupudm Press the Enter key or click OK. To run the application from diskette, put the first diskette created by running MAKEDISK.BAT into the diskette drive. Select Start, Run and type the diskette drive path and the application name (SETUPUDM.EXE). Example: a:\setupudm Press the Enter key or click OK. 5. The Universal Driver Manager detects the current display adapter and checks to see if it is a supported graphics controller. If the currently active graphics controller in the system is not a supported controller (see above list), an error message is displayed. 6. If a supported controller is found, a message is displayed showing which one was found. Select OK to start installing the driver. Follow the on-screen instructions and reboot the system to activate the new driver. 7. After the driver has been installed, you may delete the files from the download directory if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies