SOFTPAQ NUMBER: SP4064 PART NUMBER: N/A FILE NAME: CPQDISP.DRV TITLE: Deskpro Windows 95 Graphics Drivers VERSION: 1.91 Rev A LANGUAGE: Thai CATEGORY: Desktops/Drivers PRODUCTS AFFECTED: Deskpro 4000 5233MMX, 5200MMX, 5166MMX, 6233, 6200, 6180, 5200, 5166, 5133, 5120, 5100 Deskpro 2000 5233MMX, 5200MMX, 5166MMX, 6200, 6180, 5200, 5166, 5133, 5120, 5100 Deskpro XL 6200, 6150, 5133, 5120, 5100, 590, 575, 566, 560, 466, 450 Deskpro 5166, 5150, 5133, 5120, 5100, 590, 575, 4100, 466, 450 Deskpro 486/25, 486/33L, 486/50L, 386/33L, 386/33, 386/25e Prolinea 5166, 5150, 5133, 5120, 5100, 4100, 590, 575, 466, 450 Prolinea 5120e, 5100e, 575e All Deskpro I units All Deskpro XE units All Deskpro M units OPERATING SYSTEM: Microsoft Windows 95 SYSTEM CONFIGURATION: Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, CL5446, QVision 1024 I/E, or QVision 1280 I/E/P/P+ Graphics Controller EFFECTIVE DATE: September 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 3.1 SUPERSEDES: SP3759 DESCRIPTION: This SoftPaq unpacks the files required to install the Windows 95 video driver for the above-mentioned Deskpro and ProLinea models. Driver support is included for Compaq S3 V2/GX, ViRGE/GX, CL5434, CL5436, CL5446, QVision 1024 I/E, and QVision 1280 I/E/P/P+ Graphics Controllers. Optionally allows a driver diskette to be created. This driver corrects the following issues with various graphics controllers: CL5434 - Opening a DOS session with Direct Draw FoxBear Utility and a movie running causes lockup. CL5436 - Opening a DOS window with ActiveMovie playing in 1024 8bpp resolution causes lockup. CL5446 - Various FullScreen Direct Draw FoxBear modes flicker. S3 V2GX - Opening a DOS session with Direct Draw FoxBear Utility windowed and active freezes screen. - Direct Draw MPG Hardware accelerated movies are corrupted in 640 8bpp resolution. - Moving DOS loop over AVI movie causes temporary lines to appear on the Desktop. S3 Virge/GX - System does not wake up after E-Star kicks in with AVI and DOS loop running. - Opening a DOS session with Direct Draw FoxBear Utility windowed and active freezes screen. - Force-install of Debug files from DirectX 3.0a SDK unaccelerates Direct Draw. - Waking system from S1/Standby corrupts FullScreen DOS loop. - Vertical blue lines appear on 1152 16bpp 85Hz Desktop when an AVI is opened. - Dragging an icon across a window border causes a brief ghost cursor to appear in 24bpp mode. HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From the download directory, execute the SoftPaq. When executed with no parameters, files are extracted into the current directory. To extract the files into a different directory, specify the complete path of the directory as a parameter: SPxxxx Enter "Y" to confirm and files are unpacked into the download directory or the directory specified. 3. After the files have been created, you may delete the self-extracting file downloaded in step 1. 4. The driver may be installed directly from the files on the download directory or a driver diskette can be created. To create a driver diskette, run MAKEDISK.BAT. To install the driver, go to the Control Panel and select: Display/Settings/Change Display Type Verify that the Adapter Type is one of the controllers listed in the System Configuration section above. If it is not, then Cancel and Exit. If it is, then continue to select: Change/Have Disk Type in the path to the download directory or select "Browse" to specify the location of the files extracted in step 2 or the diskette. 5. Select OK to install the driver. 6. After the driver has been installed, you may delete the files from the download directory if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies